19055
67
Zoom out
Zoom in
Previous page
1/72
Next page
E-62
SD_HX500_SEC_SECL_E6.fm04/2/4
ENGLISH
TINSKA015AWZZ
F
S
V
I
N
P
E
E
SD-HX500
References
- Maintenance / Error indicators and warnings -
Maintenance
! Cleaning the cabinet
! Cleaning the laser pickup lens
Notes:
" Close the disc compartment when it is not used.
" Be careful not to damage the optical pickup or to touch it by hand.
Error indicators and warnings
When you load an unplayable disc or fail to perform operations properly, the following
messages are displayed on the unit and the TV screen.
Periodically wipe the cabinet with a soft
cloth and a diluted soap solution, then with
a dry cloth.
" Do not use chemicals for cleaning (gas-
oline, paint thinner, etc.). It may dam-
age the cabinet finish.
" Do not apply oil to the inside of the unit.
It may cause malfunctions.
Do not touch the laser pickup lens. If fin-
gerprints or dust accumulate on the pick-
up, clean it gently with a dry cotton swab.
Laser
pickup
lens
Display Meaning
DSP NG " Place the unit away from noise source or plug the
AC power cord to another AC outlet. (*)
Er-** " The unit considers the DVD mechanism is defective.
(** indicates numbers/sym-
bols.)
" The amplifier is defective.
Set this unit to the stand-by mode and turn the power
on again. (*)
FAN LOCK " The cooling fan on the back of the amplifier unit does
not run due to foreign objects caught in it.
Set this unit to the stand-by mode and remove the
foreign objects around the fan.
NO DISC " The disc is not loaded.
" The disc is loaded upside down.
NO PLAY " The disc's region number is neither 1 nor ALL.
No Signal " The digital audio input jack is not connected proper-
ly.
" Unspecified signal is received and cannot be recog-
nized.
(*): Should the same message appear even if the unit is unplugged and plugged in or
is set to the stand-by mode and on again, contact your local dealer where you pur-
chased the unit.
TV screen Meaning
The disc cannot be played with this unit or the
disc is loaded in an incorrect way.
The region number of the DVD is not "1" or
"ALL".
A disc has not been loaded.
" You are trying to perform an incorrect oper-
ation.
" The operation is prohibited.
The disc does not support the operation de-
scribed in this operation manual.
C
01
83/
15/
0
::23 40
WRO NG D CIS T EYP
C
01
83/
15/
0
::23 40
REG NIO DCO E RER OR
NO DISC
NOT
LAL OWED
ACC SES
NDE I ED
5
SHARP TINSKA015AWZZ
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp SDHX500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp SDHX500 in the language / languages: English, French as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info