19055
65
Zoom out
Zoom in
Previous page
1/72
Next page
E-60
SD_HX500_SEC_SECL_E6.fm04/2/4
ENGLISH
TINSKA015AWZZ
F
S
V
I
N
P
E
E
SD-HX500
Advanced Features
- Connecting other equipment -
! Audio connection to TV
You can listen to TV sound from the speakers by connecting the main unit using an
optical digital cable, audio digital cable or audio cable (not supplied).
To listen to TV sound:
Turn the power on and press the TV button.
Each press of this button changes the input in the order of "AUTO" "OPTI-
CAL" "COXAL" "ANALOG".
Notes:
" Plug in each cable fully to prevent noise interference.
" Refer to the manual for the connected equipment.
" You can also use the FUNCTION button to set the input to TV.
" If the input does not switch to "COXAL" automatically in "AUTO", manually change
with the TV button.
! Audio connection to VCR
You can listen to VCR sound from the speakers by connecting the main unit using an
audio cable.
To listen to VCR sound:
Turn the power on and press the VCR/AUX1, 2 button to set the input to "VCR".
Notes:
" Plug in each cable fully to prevent noise interference.
" Refer to the manual for the connected equipment.
" You can also use the FUNCTION button to set the input to "VCR".
! Audio connection to a digital tuner
You can listen to sound from the digital tuner, etc. from the speakers by connecting
the main unit using an optical digital cable or audio cable.
To listen to the digital tuner:
Turn the power on and press the VCR/AUX1, 2 button to set the input to auxiliary 1
(Digital) or auxiliary 2 (Analog).
Notes:
" You can also listen to the digital tuner sound by connecting the tuner to the digital
audio TV input jack. Set the input to TV in this case.
" Plug in each cable fully to prevent noise interference.
" Refer to the manual for the connected equipment.
" You can also use the FUNCTION button to switch the input to auxiliary 1 (Digital)
or auxiliary 2 (Analog).
! Headphones
" Before plugging in or unplugging the headphones, reduce the volume.
" Be sure your headphones have a 1/8" (3.5 mm) diameter plug and are between 16
ohm and 50 ohm impedance. The recommended impedance is 32 ohms.
" While headphones are connected, sound is not produced from the speakers.
" You cannot use the surround feature with headphones.
" Do not plug in or unplug headphones while recording. The sound may skip.
AUTO: The audio input switches automatically. (*)
OPTICAL: The audio input is switched to "TV IN OPTICAL".
COXAL: The audio input is switched to "TV IN COAXIAL".
ANALOG: The audio input is switched to "AUDIO IN TV".
(*) When optical digital, coaxial digital and analog signals are received, the unit se-
lects digital signals.
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp SDHX500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp SDHX500 in the language / languages: English, French as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info