66384
34
Zoom out
Zoom in
Previous page
1/42
Next page
32
Assignment of digital audio in- and outputs
Audio input “AUDIO DIGITAL IN”
The TV set has a coaxial digital audio input “AUDIO DIGITAL IN” and a
coaxial digital audio output “AUDIO DIGITAL OUT”. If you are using an
external digital surround ampli er for sound reproduction, you have to
feed digital audio signals to the TV, e.g. from the DVD player.
S-VIDEO OUT
DIG OUT
REAR
MAINS
L
R
(CVBS) (Y/C)
VIDEO OUT
AUDIO
STEREO OUT VIDEO OUT
I
AUX-
I
/O
II
TO TV-
I
/O
OPT OUT
RIGHT SUBW.
REAR
RIGHT
FRONT
LEFT CENTER
MULTICHANNEL AUDIO OUT
DIGITAL AUDIO OUT
PCM/MPEG2/AC3/DTS
LEFT
FRONT
PREOUT
FR
FL
SL SR SUB
C
LL
RR
AUX1 IN
DIGITAL
IN
DIGITAL
OUT
AUX OUT AUX 2
EXT2
AUDIO DIGITAL
IN OUT
DVD
Surround Amplifier
Connect the output socket of the DVD player (“DIG OUT”) to the TV’s
“AUDIO DIGITAL IN” socket with a cinch cable.
In the connection wizard you specify that audio transmission is to be
digital. Specify that the digital sound is to be assigned for example to the
Euro AV socket 2 to pass on the digital sound to the digital audio output
of the TV set and via this to the external audio ampli er. Further informa-
tion about this can be found on page 33.
Digital audio output
The digital audio signal is applied at the “AUDIO DIGITAL OUT” socket of
the TV. For example, you can connect an external digital audio ampli er
here.
An analogue audio signal from the TV set or another sound source which
is received at one of the Euro-AV sockets of the TV set is converted into
a digital signal (PCM) and output at the “AUDIO DIGITAL OUT” socket.
Conversion from external analogue AV sources to PCM is not possible
if the loudspeaker of the TV set is used as a centre channel. In this case
connect your audio ampli er additionally to the TV (“AUDIO OUT L/R”)
with a cinch cable and switch the audio ampli er to analogue audio input.
The digital TV sound or the digital sound of a connected auxiliary device
is only audible via an external digital audio ampli er.
Sound selection
If you are receiving a digital TV programme with several sound formats,
you can call up the menu “Language/sound selection” by pressing the
END button. Press the green button after this.
If you have connected an external Dolby Digital decoder and have entered
this in the connection wizard, you should now select “Dolby Digital”.
Note: The sound outputs of the TV set and speakers do not emit any
sound signals in this operating mode (Exception: the TV speakers are
used as active centre channel).
Only Stereo/PCM is reproduced with the setting “Sound via TV”. This
must be considered when selecting the sound.
Operating additional equipment
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-37GD7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-37GD7 in the language / languages: English as an attachment in your email.

The manual is 6,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info