66384
36
Zoom out
Zoom in
Previous page
1/42
Next page
34
HDMI connection
The HDMI connection (High De niton Multimedia Interface) allows dig-
ital picture and audio transmission via a connecting cable, e.g. from DVD
players. The digital picture and sound data are transmitted without data
compression and therefore lose none of their quality. No analogue/digital
conversion is necessary in the connected equipment which also led to
losses in quality.
DVI signals can be also be reproduced by the HDMI connection using a
DVI/HDMI adapter cable. This is possible because HDMI is based on DVI
and is downward compatible. That means that the digital video signals
are transmitted via HDMI. In addition both use the same copy protection
method HDCP.
Connect the DVD player or other audiovisual equipment with an HDMI
cable (type A, 19-pin) to the EXT 5 socket of the TV set. Log in the EXT 5
connection in the connection wizard (“TV menu” – “Connections” – “AV
setup”).
Select the HDMI connection in the AV selection.
Call AV selection.
External sources
VIDEO
EXT1
EXT2
EXT3
EXT4
EXT5
PC IN
Select EXT 5 with  and call up with OK.
Start playback on the connected device with HDMI connection.
The best possible formats for picture and sound are detected and set
automatically.
No sound is transmitted when a DVI/HDMI adapter cable is used for
transmission. You can feed in the appropriate analogue sound via the
audio input sockets “AUDIO IN L/R” on the TV set. The sound is played
over the TV loudspeakers.
If you have connected a digital external audio ampli er, you can select
the digital audio signal in the connection wizard (“TV menu - Connec-
tions - AV setup”) and assign it to the EXT 5 socket. You do the other
settings for the audio ampli er as described for the digital ampli er on
page 33. The digital audio signal of the DVI audio source is fed in at the
“AUDIO DIGITAL IN” socket on the TV. The digital audio signal from the
TV “AUDIO DIGITAL OUT” is fed to the ampli er.
PC connection
You can connect a PC or a Set Top Box (STB) and therefore use the TV
screen as an output device.
Connect the PC/STB with a VGA cable to the PC IN socket on the TV.
When connecting to a PC you set one of the following screen resolutions
on your PC rst. 800x600 60Hz (SVGA) or 1024x768 60Hz (XGA).
When a Set Top Box is connected you set the following screen resolu-
tions according to the possibilities of the Set Top Box:
698x576i (PAL), 698x480i (NTSC) .
720x480i, 720x 576i (SDTV - standard modes in STB).
1280x720p, 1920x1080i (HDTV modes).
Select the PC IN connection in the AV selection.
Call “PC IN”-connection, or with
PC
call AV selection.
External sources
VIDEO
EXT1
EXT2
EXT3
EXT4
EXT5
PC IN
Select PC IN with  and call up with OK.
Start the connected device.
Set geometry
Call the TV menu with the MENU button, select “Geometry” with
and set:
If the picture is not positioned correctly you can move the picture hori-
zontally and vertically here so that it lls the whole screen. You can also
set the “Phase position” so that the picture appears in the best possible
quality.
Set colour standard
Call the Picture menu with the
button. Select “Colour standard”
with and select.
The colour standard for a connected PC is “RGB”.
In Set Top Boxes you usually set “Ycc” as a colour standard. Other
formats such as “Ypp” or “RGB” can also be output. Please consult the
manual of the connected device.
If the wrong standard is selected, you will recognise this from the wrong
colours in the display.
Operating additional equipment
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-37GD7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-37GD7 in the language / languages: English as an attachment in your email.

The manual is 6,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info