66384
32
Zoom out
Zoom in
Previous page
1/42
Next page
30
Login and connect equipment
You have logged in and connected all connected equipment in the initial
start-up. If you want to connect other equipment or disconnect equip-
ment, call the connection wizard.
Call up the TV menu
Select “Connections”
Select “AV setup” and
call up with OK.
State what equipment you want to connect. The connection wizard then
shows you which sockets you should connect this equipment to. Then
connect the equipment to these sockets.
Connecting VCR/DVD recorders
In addition to the connection via the Euro-AV sockets you also have
to connect the antenna (only for terrestrial antenna or cable systems)
through the VCR/DVD recorder to the TV set. The antenna signal is then
available to the VCR/DVD recorder and the TV set.
Note: Use Euro AV cables with right-angled plugs as shown.
ENTREE
ANTENNE
EURO AV2
DECODER
EURO AV1
AUDIO/
VIDEO
SORTIE
ANTENNE
AERIAL
RF OUT
SORTIE
GL
D
R
OUT
AUDIO
Search for and store the station of the video recorder (if no Euro AV
cable is available)
Switch on the test station on the VCR or insert a recorded tape and start
playback. In some video recorders the station must be switched on by
activating the modulator.
Then call the AV selection on the TV set with
or with button 0. Select
the menu item “VIDEO” in the AV selection and call with OK.
To prevent “normal” TV stations being found in the search, pull out the
antenna plug from the antenna input of the VCR temporarily (the cable to
the antenna system).
If you cannot see the test station or playback from the cassette, the VCR
is transmitting on a different station. You then have to search for the
station or set it manually.
Call the “TV menu” with the MENU button.
Select “Setup” with .
Select “Channels” with and press OK.
Select “Manual tune” with and press OK.
Enter station “E30” under the “Channel” item (UHF range, select in this
menu above if necessary).
Start search with the blue button.
If the station has been found, enter the name “VIDEO”, con rm with
OK and save with the red button.
A list of the stored stations is displayed
Select AV here and overwrite this programme place with the red but-
ton.
Hide the menu with the END button.
Reconnect the antenna plug back in.
If you now get interference because a TV station is transmitting on the
same channel as the VCR station, you have to change the transmitting
station on the VCR and repeat the steps 1 ... 10.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Operating additional equipment
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-37GD7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-37GD7 in the language / languages: English as an attachment in your email.

The manual is 6,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info