516034

Sharp AL-1452 Manual

31
Zoom out
Zoom in
Previous page
1/140
Next page
DGB
1-17
AL-1043, AL-1252,
AL-1452
AL-1043, AL-1252,
AL-1452
1. Place the original face down on the
original table. Align it with the original
scale and close the original cover.
The bypass tray automatically feeds up to 50 sheets of
standard copy paper . The single-sheet manual bypass
and the bypass tray can be used to feed standard
paper, transparency film, labels and other special
purpose papers measuring from A6 to A4 and in the
weight range of 52 to 128 g/m
2
. (For paper weighing from
110 to 128 g/m
2
, A4 is the maximum size.)
BYPASS FEED (special paper)
MANUELLER EINZUG (Spezialpapier)
1. Das Original mit der Vorderseite nach
unten auf den Originalauflagetisch
auflegen. An der Originalformatskala
ausrichten und die Originalabdeckung
schließen.
Über das Fach für Mehrfacheinzug können bis zu 50
Blatt Standard-Kopierpapier automatisch eingezogen
werden. Der manuelle Einzelblatt-Einzug und das Fach
für Mehrfacheinzug können verwendet werden, um
Standardpapier, transparente Folien, Etiketten,
Pauspapier und andere Papiersorten für spezielle
Zwecke im Format A6 bis A4 und mit einem Gewicht
von 52 bis 128 g/m
2
zuzuführen (für Papier mit einem
Gewicht von 110 bis 128 g/m
2
ist A4 das größtmögliche
Format).
The original image must be smaller
than the paper or media for copying. If
the original image is bigger than the
paper or media, this may cause
smudging on the edges of the copies.
Das Originalbild muß kleiner als das
verwendete Kopierpapier oder -medium
sein. Ist das Originalbild größer als das
Papier oder Medium, werden die Kopien
an den Rändern unsauber.
2. Set the paper guides to the copy pa-
per width. Insert a single sheet of
copy paper (print face down) into the
feed slot of the manual bypass.
Copying will begin automatically.
• Paper must be fed narrow side into the
feed slot.
• Transparency film, labels, and other
special purpose papers must be fed
individually.
• When copying onto transparency film,
remove each copy promptly. Do not let
copies stack up.
• When loading an envelope, make sure
that it is straight and flat.
Print face
Druckseite
2. Die Papierführungen auf die Breite des
Kopierpapiers einstellen. Ein einzel-
nes Blatt Kopierpapier (zu bedrucken-
de Seite nach unten) in den Schlitz des
manuellen Einzugs einführen.
Der Kopiervorgang beginnt automa-
tisch.
• Das Papier muß mit der schmalen Seite
in den Einzugsschlitz eingeführt werden.
• Transparente Folie, Etiketten, Zeichen-
papier und andere spezielle Papiersorten
müssen einzeln eingezogen werden.
• Wird auf transparente Folie kopiert, muß
jede Kopie sofort entnommen werden. Die
Kopien sollten nicht übereinander zu lie-
gen kommen.
• Beim Einlegen eines Umschlags, ver
sichern Sie sich, daß er gerade und flach
liegt.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp AL-1452 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp AL-1452 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info