516034

Sharp AL-1452 Manual

30
Zoom out
Zoom in
Previous page
1/140
Next page
DGB
1-16
100%
50%
70%
81%
100%
141%
200%
A5 A4
B4 A4
A4 A5
ZOOM
A4 A5
B4 A4
100%
A5 A4
1. Set the original and check the copy
paper size.
2. Use the copy ratio selector key and/or
zoom (
N
,
L
) keys to select the de-
sired copy ratio.
Three preset reduction ratios and two enlargement ratios
can be selected. The zoom function enables copy ratio
selection from 50% to 200% in 1% increments.
REDUCTION/ENLARGEMENT/ZOOM
VERKLEINERUNG/VERGRÖSSERUNG/ZOOM
• To verify a zoom setting without chan-
ging the zoom ratio, press and hold
down the copy ratio display (%) key.
When the key is released, the display
will return to the copy quantity display.
• To reset the ratio to 100%, press the
copy ratio selector key repeatedly until
the 100% indicator lights up.
To select a preset copy ratio:
Preset reduction and enlargement ratios
are: 50%, 70%, 81%, 141%, and 200%
To select a zoom ratio:
When a zoom (
N
or
L
) key is pressed,
the ZOOM indicator will light up and the
zoom ratio will be displayed in the dis-
play.
In order to quickly change the zoom
ratio, press and hold down the (
N
or
L
)
key. The displayed setting will stop on
any preset reduction or enlargement
setting. To further reduce or raise the
zoom ratio, firstly release the key and
then press and hold down.
3. Set the number of copies using the
copy quantity (
<
,
<
) keys and press
the print (
) key.
1. Das Original auflegen und das Format
des Kopierpapiers überprüfen.
2. Die Kopiermaßstabtaste und/oder die
Zoom-Tasten (
N
,
L
) verwenden, um
den gewünschten Kopiermaßstab ein-
zustellen.
Es stehen drei voreingestellte Verkleinerungs- und zwei
Vergrößerungsmaßstäbe zur Auswahl. Die Zoom-Funk-
tion ermöglicht die Einstellung des Kopiermaßstabs
zwischen 50% und 200% in Schritten von 1%.
• Um eine Zoom-Einstellung ohne Än-
derung des Zoom-Maßstabs zu über-
prüfen, die Taste zur Anzeige des
Kopienwiedergabefaktors (%) drücken
und halten. Wird diese Taste freigege-
ben, erscheint wieder die Anzeige der
Kopienanzahl.
• Zum Rückstellen des Maßstabs auf
100% die Kopiermaßstabtaste mehr-
fach drücken, bis die 100%-Anzeige
aufleuchtet.
Auswahl eines voreingestellten Kopi-
enmaßstabs:
Die voreingestellten Verkleinerungs- und
Vergrößerungsmaßstäbe sind: 50%,
70%, 81%, 141% und 200%.
Auswahl eines Zoom-Maßstabs:
Durch Drücken einer Zoom-Taste (
N
oder
L
) leuchtet die ZOOM-Anzeige
auf, und der Zoom-Maßstab wird auf der
Anzeige angezeigt.
Um den Zoom-Maßstab schnell zu ver-
ändern, die Taste (
N
oder
L
) drücken
und halten. Die Anzeige stoppt jedoch
bei den voreingestellten Werten für den
Verkleinerungs- und Vergößerungsmaß-
stab. Um diese Werte zu übergehen, die
Taste loslassen und anschließend er-
neut drücken und halten.
3. Die gewünschte Anzahl der Kopien mit
den Kopienanzahl-Tasten (
<
,
<
) ein-
stellen und die Kopiertaste (
) drük-
ken.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp AL-1452 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp AL-1452 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info