753049
60
Zoom out
Zoom in
Previous page
1/92
Next page
Installation instructions, only for experts p. 16/44
5.7. Installing bench sensor F2 (optional)
1. Guide the wires for the bench sensor through the cable bushing 8 into the
low-voltage connection area 4.
2. Connect the wires for the bench sensor to the terminals labelled “sw-br” in
terminal strip 3.
5.8. Installing humidity temperature sensor FTS2 (optional)
1. Guide the wires for the sensor through the cable bushing 8 into the low-
voltage connection area 4.
2. Connect the wires for the temperature sensor lines to the terminals labelled
sw-br” in terminal strip 3.
a. Connect the black wire to terminal “sw”.
b. Connect the brown wire to terminal “br”.
3. Connect the wires for the humidity sensor to the terminals labelled “or-rt-gn
in terminal strip 2.
c. Connect the orange wire to terminal “or”.
d. Connect the red wire to terminal “rt”.
e. Connect the green wire to terminal “gn”.
5.9. Finishing the installation
Screw two cross-head screws into the lower fastening holes 5 (Fig. 2).
Ensure that the sauna control unit is tted securely.
Place the control panel onto the housing lower part. To do so, insert tabs into
the two lateral holders and press onto the housing lower part until the stop
position.
Place the housing cover onto the housing lower part, swivel downward and
press until it clicks audibly.
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sentiotec CK 31 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sentiotec CK 31 in the language / languages: English, German as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info