753049
59
Zoom out
Zoom in
Previous page
1/92
Next page
EN
Instructions for installation and use p. 15/44
5.2. Connecting the evaporator
Guide the evaporator lines through the installation opening 9 (connection
area for 230 V / 400 V i) into the housing lower part 1 and connect ac-
cording to the circuit diagram (Fig. 7) to the terminal j with a maximum
tightening torque of 1.2 Nm.
5.3. Connecting the light
Guide the light lines through the installation opening h (connection area for
230 V / 400 V i) into the housing lower part 1 and connect according to the
circuit diagram (Fig. 7) to the terminal k (as described in subsections in 3).
5.4. Connecting the fan (optional)
Guide the fan lines through the installation openings h (connection area for
230 V / 400 V i) into the housing lower part 1 and connect according to
the circuit diagram (Fig. 7) to the terminal k.
5.5. Connecting the optional power enhancement
Guide the line for the connection to terminals ST1, ST2, ST3 of the power
enhancement through installation opening g (connection area for 230 V /
400 V i) into the housing lower part 1 and connect according to the in-
stallation instructions of the power enhancement.
5.6. Connecting heater sensor F1
1. Guide the wires for the heater sensor through the cable bushing 8 into the
low-voltage connection area 4.
2. Connect the red wires for the heater sensor to the terminals labelled “r-r
in terminal strip 3.
3. Connect the white wires for the heater sensor to the terminals labelled
w-w” in terminal strip 3.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sentiotec CK 31 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sentiotec CK 31 in the language / languages: English, German as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info