760102
12
Zoom out
Zoom in
Previous page
1/18
Next page
EN - 10
Credit cards
1. Hold the credit card upright.
2. Slide the credit card centrally into the paper / credit card feed slot
8 (see fig. G).
The paper shredder switches on automatically and draws in the credit
card.
Approx. 1-2 seconds after processing the credit card, the paper
shredder will automatically stop and switch to standby mode.
fig. G
9. Emptying the waste bins
WARNING!
Risk of injury!
Handling the paper shredder improperly may result in injury.
- Do not touch the cutting unit with your fingers.
For proper waste disposal, shred credit cards only when there is no processed paper,
and shred paper only when there are no processed credit cards in the paper / credit card
waste bin.
Empty the waste bins regularly to avoid paper, credit card, or CD residues being drawn into the
cutting unit from underneath.
1. Switch off the paper shredder (slide switch 4 at the OFF position) and disconnect the power cord
1.
2. Pull the paper / credit card waste bin qd out from the base unit qf.
3. Remove the CD waste bin qs from the paper / credit card waste bin.
4. Empty the paper / credit card and CD waste bins separately.
5. Replace the CD waste bin in the paper / credit card waste bin and then slide the paper / credit
card waste bin back into the base unit. You must fully slide the paper / credit card waste bin
into the base unit until a click sound is heard. This indicates that the safety switch 6 has been
deactivated for normal operation.
10. Paper, CD or credit card jam
WARNING!
Risk of injury!
Handling the paper shredder improperly may result in injury.
- Never use objects of any kind to clear jammed CDs, credit cards or paper. Do not insert objects
such as knives, scissors etc. into the feed slots.
To clear a jam:
1. Set the slide switch 4 to the REV position. The paper shredder runs in reverse direction.
2. The paper, credit card, or CD is discharged through the respective feed slot.
3. Allow the paper shredder to cool down to room temperature before you restart.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SSK 482 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SSK 482 in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info