760102
14
Zoom out
Zoom in
Previous page
1/18
Next page
EN - 12
13. Storage
1. Clean the paper shredder (see chapter „Cleaning and maintenance“).
2. Store the paper shredder in a clean and dry location. Never disassemble the paper shredder for
storage.
3. Keep the paper shredder away from children.
14. Troubleshooting
WARNING!
Risk of electric shock!
Repairing the paper shredder yourself or using unsuitable parts for repair may increase the risk of
electric shock.
- Do not open the housing of the paper shredder; instead, have qualified professionals perform
any repairs. Contact a qualified workshop for this. Liability and warranty claims are waived in the
event of repairs performed by the user or incorrect operation.
Some problems may be caused by minor faults that you can fix yourself. To do so, follow the
instructions in the following table. If it is still not possible to resolve the problem, contact customer
service. Do not repair the paper shredder yourself.
Problem Cause Solution
The paper shredder
switches off during
operation.
The paper shredder is
overloaded.
Switch the paper shredder off and unplug
the power cord. Let it cool down to room
temperature before putting it back to use.
The paper shredder
does not start when
feeding in paper.
The paper may have been
inserted at an oblique
angle; the detection sensor
is thus not activated.
Correctly insert the paper into the feed slot.
The paper is too thin, too
soft or too creased to reli-
ably activate the detection
sensor.
1. Set the slide switch to
REV
position and
pull the paper out of the feed slot.
2. Fold the paper and feed it again.
A paper jam occurs. Too many sheets may
have been fed in the paper
shredder at a time.
Set the slide switch to the REV position to
clear the jam.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SSK 482 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SSK 482 in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info