760102
10
Zoom out
Zoom in
Previous page
1/18
Next page
EN - 8
7. Set-up
1. Make sure that the paper shredder is switched off (slide switch 4 at the OFF position) before
plugging it into a socket.
2. Connect the power cord 1 to a socket.
3. Set the slide switch to the AUTO position. The paper shredder is now ready for use.
It is in the standby mode.
8. Shredding
WARNING!
Risk of injury!
Handling the paper shredder improperly may result in injury.
- Hold the paper by both sides when inserting into the feed slot. Make sure that your fingers do not
get too close to the feed slot.
- Only hold the CD by the outer edge when inserting into the feed slot. Make sure that your finger is
not in the CD hole, this can cause injury when the CD is drawn in.
- Hold the credit card by its narrow side when inserting into the feed slot. Make sure that your
fingers do not get too close to the feed slot.
NOTICE!
Risk of damage!
Improper handling of the paper shredder may result in damage to the paper shredder.
- Do not operate the paper shredder for longer than 3 minutes without interruption. Allow it to cool
down to room temperature first before restarting operation.
- Do not feed damp paper into the feed slot. It could wrap around the cutting unit and cause
a blockage.
- Do not feed paper with paper clips. This could damage the cutting unit.
- Do not feed more than 10 sheets of paper simultaneously into the feed slot. This could damage
the cutting unit.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SSK 482 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SSK 482 in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info