Manual Sencor SRV 9250 (page 8 of 11) (English)

759461

Zoom out

Zoom in

1/11

- 8 - 07/2019

EN Robotic vacuum cleaner

User'smanual

BEFORE FIRST USE

■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,

when one has already familiarised themselves with previous use of similar types of

appliances. Only use the appliance in the manner described in this user’smanual.

Keep this user'smanual in asafe place where it can be easily retrieved for future use.

In the event that you hand this appliance over to somebody else, make sure to also

include this user'smanual.

■ We recommend saving the original cardboard box, packaging material, purchase

receipt and responsibility statement of the vendor or warranty card for at least the

duration of the legal liability for unsatisfactory performance or quality. In the event

of transportation, we recommend that you pack the appliance in the original box

from the manufacturer.

■ Carefully unpack the appliance and take care not to throw away any part of the

packaging before you find all the parts of the appliance.

DESCRIPTION OF THE APPLIANCE AND ACCESSORIES

A1 Control panel

A2 Bumper bar with an anti-collision

sensor

A3 Laser navigation module

A4 Main switch

A5 Power adapter connector socket

A6 Dust container

A7 2-in-1 mop unit

Consists of awater tank, dust

container and amop fabric

A8 Container release latch

A9 Charging contacts

A10 Front swivel wheel

A11 Bottom anti-fall sensor, central

A12 Left rotary brush (L)

A13 Bottom anti-fall sensor, left

A14 Left motorised rubber wheel

A15 Bottom anti-fall sensor, right

A16 Right rotary brush (R)

A17 Right motorised rubber wheel

A18 Battery compartment cover

A19 Central rotary brush compartment

A20 Suction hole

A21 Central rotary brush cover

A22 Central rotary brush

B1 Power adapter

B2 Power adapter plug

B3 Power indicator

B4 Charging station

B5 Charging contacts

B6 Power adapter plug socket

C1 Remote control

C2 Display

C3 Scheduled cleaning setting mode

C4 Return to the charging station

button

C5 Forward button

C6 Left button

C7 Right button

C8 Reverse button

C9 Vacuum cleaner start / off button

C10 Cleaning mode selection button

C11 Time setting button

C12 Maximum cleaning mode in which

the vacuum cleaner cleans until the

battery is almost flat.

C13 Battery compartment cover

C14 Battery compartment

(2pcs AAA × 1.5V)

D1 Power button D2 Wi-Fi indicator

E1 Dust container

E2 Water tank

E3 Mop fabric

E4 Duster fastening velcro strips

E5 Filling opening cap

E6 Container contacts

F1 HEPA filter holder

F2 HEPA filter

Highly effective air-borne particle

filter able to capture even the finest

dust particles.

F3 Cleaning brush

G1 HEPA filter holder

G2 HEPA filter

Highly effective air-borne particle

filter able to capture even the finest

dust particles.

H1 Latches

H2 Rotary brush cover

H3 Rotary brush

H4 Brush bearings

I1 Magnetic tape

PURPOSE OF USE AND FEATURES OF THE ROBOTIC VACUUM

CLEANER

■ The robotic vacuum cleaner is intended for cleaning various types of hard floors

such as wooden or laminate floating floors, tiles, vinyl, etc. and carpets with alow

pile height. While vacuuming, it effectively combines various routes to optimally

clean the entire floor area.

■ The suction hole effectively removes hair, animal fur, etc. The two side rotary brushes

brush dirt out of hard-to-reach places along walls and furniture and out of corners.

The motorised rubber wheels protect sensitive floors against scratching and can

travel over threshold strips up to aheight of 1 cm and ride on to a2 cm high carpet.

■ The suspended bumper enables the vacuum cleaner to dampen the approach to an

obstacle and to efficiently clean around it. The infrared sensors in the front bumper

prevent the robotic vacuum cleaner from colliding with obstacles. Safe operation in

rooms with stairs is made possible by the bottom anti-stair-fall sensors.

■ Another advantage of the a robotic vacuum cleaner is the mop function, which

enables dry and wet wiping of smooth hard floor surfaces. While wiping, the vacuum

cleaner vacuums small bits of dirt and dust from the floor to prevent the mop fabric

from being excessively soiled during the cleaning cycle. When the vacuum cleaner

finishes cleaning, it will automatically shut off the supply of water and thereby limit

it leaking on to the floor.

■ For easy identification of the operating state, the button on the cover has an

indicator light the colour of which indicates low battery voltage (lit red), battery

charging (flashing alternately red and blue), full charge and operation (lit blue).

Apart from the indicator lights, the vacuum cleaner also has audio signals and voice

messages that accompany certain functions or error states of the vacuum cleaner,

see chapter VOICE MESSAGES.

■ The remote control facilitates convenient control, enabling the vacuum cleaner

to be turned on and off, to be set to the automatic cleaning mode, to select an

operating mode, to send the robotic vacuum cleaner to the charging station or to

set scheduled cleaning.

■ The vacuum cleaner is equipped with GYRO MAPPING function (orientation in

space), which can identify the space geometry of a room in which it is cleaning,

thereby the vacuum cleaner is able to better clean the floor. The vacuum cleaner

is also equipped with laser navigation by means of which it maps out each room

and then starts to clean it systematically. Both functions are built-in and cannot be

affected in any way.

PREPARING THE ROBOTIC VACUUM CLEANER FOR OPERATION

INSTALLING AND USING THE ROTARY BRUSHES

■ The rotary brushes A12 and A16 are intended for smooth floor surfaces and ensure

effective cleaning in corners, along walls and furniture.

■ Turn the vacuum cleaner upside down. Gradually push the rotary brushes precisely

and with force on to the pins that are intended for them. While doing this, make sure

that the marks L and R both on the brushes and on the vacuum cleaner match. Turn

the vacuum cleaner back over to the operating position.

■ When using the vacuum cleaner to clean rooms with carpets, remove the rotary

brushes. When removing them, proceed in the reverse sequence to their installation.

INSERTING AND REMOVING THE BATTERY

■ The robotic vacuum cleaner is equipped with aLi-ion battery. If the battery is packed

separately, it is necessary insert it into the vacuum cleaner before first use. Use only

the original battery type.

■ Make sure that the vacuum cleaner is turned off with the main switch A4. Turn the

vacuum cleaner upside down and screw off the cover A18.

■ Remove the vacuum cleaner connector from the battery compartment. Connect the

battery connector to it. The battery can only be connected in one direction.

■ Screw the cover A18 back on and turn the vacuum cleaner back over to the

operating position.

■ Remove the battery in reverse sequence. Prior to removing it, always check that the

vacuum cleaner is turned off using the main switch. The fabric strips on the body of

the battery make battery removal easier.

■ When the vacuum cleaner will not be used for an extended period of time, take out

the battery and store it in adry, clean and cool place out of children'sreach.

LOCATION OF THE CHARGING STATION

■ The charging station B4 serves to automatically recharge the battery and the

vacuum cleaner must have good access to it.

■ Locate the charging station against awall on ahard, even and dry surface within

reach of a power socket. Make sure that there are no stairs or obstacles within

adistance of 1m on the left and right of the charging station and within adistance

of 2 m in front of the charging station, that would prevent the vacuum cleaner from

finding the charging station and docking successfully.

■ Insert the power adapter plug B2 into socket B6 of the charging station, and insert

the power cord plug into apower socket. Place the power cord in such away that it

does not tangle into the cleaning brushes of the vacuum cleaner.

■ In the event that the vacuum cleaner is not used for an extended period of time,

disconnect the charging station from the power socket and store it in adry, clean

and cool place.

CHARGING THE BATTERY FOR THE FIRST TIME

Note:

Prior to charging the battery, the vacuum cleaner must be turned on

using the main switch A4.

■ Before using the vacuum cleaner for the first time, it is necessary to fully charge the

battery for at least 5 hours.

■ Check that the charging station is correctly positioned and connected to apower

socket according to chapter Location of the charging station. Turn on the main

switch A4 of the vacuum cleaner, grasp the robotic vacuum cleaner and manually

place it into the charging station so that the charging contacts A9 on the underside

of the vacuum cleaner and the charging contacts B5 on the charging station are

connected. When the contacts are connected, the charging process will start.

■ The vacuum cleaner can also be charged without using the charging station. Insert

the plug B2 of the power adapter B1 into socket A5 of the vacuum cleaner, and

insert the power cord plug into apower socket.

■ During the charging process, the indicator light on button D1 will alternately flash

blue and red.

■ When the battery is fully charged, the indicator light of button D1 will remain

permanently lit blue and the process will end automatically. The vacuum cleaner

is now ready for use.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SRV 9250 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor SRV 9250 Manual

Product: