759963
6
Zoom out
Zoom in
Previous page
1/12
Next page
EN-6
EN
Hair Clipper
SHP 3301BL / SHP 3302RD / SHP 4301BL / SHP 4302RD
2016 05/2016
CHARGING THE HAIR CLIPPER
This hair clipper contains a built-in Ni-MH battery and therefore it is recommended to charge, use
and store it at an ambient temperature of 15–30 °C.
Make sure that switch A6 is set to the OFF (turned off) position before charging the hair clipper.
Plug the power adapter connector A8 to the socket A7. Connect the power adapter A8 to an
electrical power socket (220–240 V).
After connecting the hair clipper to a power socket, the LED charging indicator A4 will be lit.
A complete charge takes approximately 8 hours.
Note:
If you are charging the hair clipper for the first time or if you have not used it for a long time
(longer than 3 months) then a complete charge requires at least 16 hours.
Attention:
Do not use the hair clipper while it is charging.
Disconnect the charged hair clipper from the power adapter A8 and unplug the power adapter
A8 from the electrical power socket. After disconnecting the hair clipper from the power
adapter A8, the LED charging indicator A4 will turn off. A fully charged hair clipper will run for
approximately 50 minutes.
Recommendations for achieving the longest possible battery lifetime:
Charge the hair clipper at room temperature.
Do not leave the hair clipper connected to the electrical power source for longer than is necessary
to charge it.
Do not wait for the hair clipper to become completely flat. It is better to recharge the battery
before the battery is completely flat.
Ideally, store the hair clipper fully charged.
If you do not use the hair clipper for a long time, charge it at least once every 6 months.
OPERATING THE HAIR CLIPPER
The hair clipper is suitable for cutting dry or lightly dampened hair or beards. Do not use it to cut
hair that has just been washed.
Prior to every use, check that the cutting unit A1 or the comb attachment A2 are not damaged.
1. CUTTING WITH THE COMB ATTACHMENT
1.1 CUTTING HAIR
Use the hair clipper on clean, dry or lightly dampened hair. Before cutting hair, thoroughly comb
out the hair in the direction of growth.
Seat the person whose hair you will be cutting in such a way that their head is at the height of your
chest. Use a towel to cover the neck and shoulders to protect clothing from hair clippings.
Place the comb attachment A2 onto the cutting unit A1. The guide bars on the sides of the
attachment A2 must fit into the grooves on the sides of the cutting unit A1.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SHP 3301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SHP 3301 in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info