– guests of hotels, motels and other accommodation locations;
– in bed and breakfast establishments.
Warning:
Take care that water is not poured on the power plug.
Attention: Hot surface.
When using the appliance, its accessible surfaces may
heat up. Do not touch the hot surface.
■Before connecting the appliance to a power socket, check that the rated voltage on its rating label matches the electrical voltage in the power socket.
■Connect the appliance only to a properly grounded socket. For safety reasons, we do not recommend using multi-socket adapters or extension cords.
■Do not place the appliance on window sills, kitchen sink drainboards or unstable surfaces. Always place it on a stable, even and dry surface.
■Do not place the appliance on or near an electrical or gas stove, or in the vicinity of an open flame.
■Never use the appliance in the near vicinity of a bath, shower or swimming pool.
■Use the appliance only for the purpose for which it was designed.
■Use the appliance according to the instructions in the user‘s manual. Otherwise, injuries, damage to the appliance or a dangerous situation may result.
■Only use the appliance with the original accessories that came with it.
■To ensure sufficient air circulation, free space of at least 15 cm must be maintained around and above the appliance when it is running.
■Only use the top surface of the appliance for warming cups. Do not use it as a storage rack.
■Fill the water tank with clean cold water. Do not pour hot water or other liquids into it or place any items inside it.
■Before turning on the appliance, check that:
■– the drip tray together with the grate is installed in position;
■– the water tank is filled with a sufficient amount of water and is properly installed in position. The water level must not exceed the water level mark.
■When operating the appliance, be especially careful to avoid scalding by boiling water or steam.
■The hot water function must not be used continuously, no more than one full water tank at a time.
■Regularly inspect the water level in the water tank when using the appliance. When the water level falls below the minimum water level mark, add water. Before adding
water, first turn the appliance off and disconnect it from the power socket.
■Use the built-in-in coffee grinder only for grinding coffee beans. Do not use it for any other purposes.
■Ensure that no hair or other items enter the grinder while it is grinding. The coffee bean hopper lid should always be properly closed unless one is refilling coffee beans
or setting the fineness of the grind.
■To protect the pump from damage, the appliance is equipped with a built-in thermal fuse that will disengage it when it runs empty. In the event that such a situation
occurs, disconnect the power cord from the power socket and allow the appliance to cool down for at least 30 minutes. Then you may continue using it.
■Do not move the appliance with a coffee cup located on the drip tray grate or with cups located on the cup warming surface.
■Make sure that the power cord does not come into contact with a hot surface.
■Disconnect the appliance from the power socket by gently pulling the plug of the power cord, and not the power cord itself. Otherwise, this could damage the power
cord or the socket.
■The appliance is equipped with a removable power cord. If the power cord is damaged, it must replaced with a new original power cord.
■Do not submerge the appliance, the power cord or the power plug in water or in any other liquid.
■Prevent the power cord and power plug from coming into contact with water or another liquid.
■Make sure that the removable power cord does not come into contact with water or moisture.
■To avoid the danger of injury by electrical shock, do not repair the appliance yourself or make any adjustments to it. Have all repairs performed at an authorised service
centre. By tampering with the appliance, you risk voiding your legal rights arising from unsatisfactory performance or quality warranty.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Sencor SES 7015CH at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Sencor SES 7015CH in the language / languages: English as an attachment in your email.
The manual is 0,51 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
