Manual Sencor SDH 3020 (page 10 of 13) (English)

759179

Zoom out

Zoom in

1/13

EN Dehumidifier

User'smanual

Prior to using this appliance, please read the user'smanual thoroughly, even in cases,

when one has already familiarised themselves with previous use of similar types of

appliances. Only use the appliance in the manner described in this user’smanual.

Keep this user'smanual in asafe place where it can be easily retrieved for future use.

We recommend saving the original cardboard box, packaging material, purchase receipt

and responsibility statement of the vendor or warranty card for at least the duration of

the legal liability for unsatisfactory performance or quality. In the event of transportation,

we recommend that you pack the appliance in the original box from the manufacturer.

DESCRIPTION OF THE APPLIANCE

A1 Control panel

A2 Front cover

A3 Condensate tank

A4 Viewing window

A5 Handles (on both sides)

A6 Drain hose outlet connection

(only for continuous draining of

condensate)

A7 Travel wheels

A8 Pump drain hose outlet connection

(only accessible on certain models)

A9 Power cord holder (used only for

storage)

A10 Air filter (located behind agrille)

A11 Air outlet grille

Not shown

- Pump drain hose

- Threaded end

DESCRIPTION OF THE CONTROL PANEL

B1 PUMP button (for pumping out

condensate using apump)

B2 COMFORT button (intelligent room

humidity control mode)

B3 FILTER button (air filter cleaning

check)

B4 CONT. button (for continuous

draining of condensate)

B5 TURBO button (fan speed control)

B6 TIMER button (timer control)

B7 ◄/► buttons

B8 On/Off button

B9 Display

B10 Automatic start indicator light

B11 Automatic shut-off indicator light

B12 Full condensate tank indicator light

B13 Automatic defrost indicator light

BEFORE FIRST USE

Before first use, take the appliance and its accessories out of the packaging material

and remove all promotional labels and stickers. Check that neither the appliance nor

any of its parts is damaged.

Note:

Travel wheels A7 may be removed on certain models. Screw the travel wheels

to the underside of the appliance prior to using it.

Do not travel over carpets, door thresholds or other obstacles with the wheels.

This could damage them.

Do not move the appliance when the condensate tank is full.

Certain models may also be supplied without travel wheels A7.

Installing the power cord holder

When planning on not using the appliance and preparing to store it, install the holder

that serves to conveniently store the power cord.

Insert the holder into the cut-out at the rear of the appliance – see figure C.

INSTALLATION LOCATION OF THE APPLIANCE

Locate the appliance on an even, dry and stable surface within reach of aproperly

grounded power socket.

Do not use the appliance outdoors.

To ensure sufficient air circulation, leave at least 20cm of free space around the sides

of the appliance.

Locate the appliance in aroom where temperature does not fall below 5°C. If the

temperature were to fall below 5°C, there is arisk of frost forming inside the appliance,

which would reduce its efficiency.

Do not locate the appliance in the vicinity of dryers, heating devices and other sources

of heat.

Use the appliance in locations where humidity could damage books or other valuable

items.

The appliance must be used in aclosed room in order to ensure its maximum

effectiveness. Therefore, close the doors and windows of the given room.

OPERATING THE APPLIANCE

The dehumidifier is used for drying out, for example, flooded basements, rooms with

an increased level of moisture, etc. Do not use it in areas where substances or items are

stored requiring precise room temperature and humidity control.

If using the appliance for the first time, it is important to allow it to run continuously

for 24hours.

Use the appliance at an ambient temperature in the range 5°C–32°C(41°F–90°F)

and humidity in the range 30%-80%.

Always wait at least 3minutes before turning the appliance on again.

Do not connect the appliance to apower socket to which another appliance is already

connected. We recommend connecting the appliance to an independent circuit.

Make sure that the condensate tank is correctly installed in the appliance, otherwise the

appliance may not function correctly.

OPERATING THE APPLIANCE

Make sure that the appliance is located in asuitable place and that it is correctly

assembled. Then insert the power plug into apower socket.

Turning on / off

Press button B8 to turn on the appliance. In order to turn off the appliance, press

button B8 again.

The appliance will turn off automatically if the condensate tank A3 is full or incorrectly

installed.

If you turn the appliance off and then need to turn it on again quickly thereafter, the

appliance will start again after approximately 3minutes. This function protects the

compressor against damage.

The appliance is equipped with an automatic restart function (AUTO-RESTART) for the

event of apower outage. Settings will remain stored in the memory of the appliance, and

after power is restored, the appliance will automatically start in the previously set mode.

When you have finished using it, turn off the appliance and disconnect the power cord

from the power socket.

Display

Depending on the selected mode, the display A9 shows: set humidity in %, automatic

start / shut-off time, current humidity in % (+/-5% in the range 30% - 90% relative

humidity).

Setting the COMFORT operating mode

Button COMFORT B2 serves to turn the COMFORT mode on and off (intelligent room

humidity control mode). The On state is signalled by alit indicator light above the

COMFORT B2 button.

In this mode, humidity is controlled automatically depending on the current room

temperature. Aspecific humidity cannot be set.

Setting the continuous dehumidification mode

The CONT. B4 is used to turn the continuous dehumidification mode on and off. The On

state is signalled by alit indicator light above the CONT. B4 button.

In this mode, the appliance runs continuously until the condensate tank A3 is completely

full of condensate. Aspecific humidity cannot be set.

Setting the humidity

Use buttons ◄/► to set the required humidity in the range 35% - 85% RH (relative

humidity). Each time abutton is pressed, the value will increase or decrease by 5%. The

set humidity will be shown on the display B9.

Setting fan speed

Button TURBO B5 is used to set normal or high fan speed. The high speed fan setting is

signalled by the indicator light above the TURBO B5 button being lit.

For maximum dehumidification speed, set the fan to the high speed. If you need the fan

to be more quiet or if humidity has declined, set the normal fan speed.

Setting an automatic start

While the appliance is turned off, press the TIMER B6 button. The indicator light B10

will be lit, meaning that the appliance is set to the automatic start mode. Use buttons

◄/► to set the time after which the appliance will turn on automatically. You can set

atime from 30minutes to 24hours, initially in 30-minute increments (up to 10hours)

and then in 1-hour increments.

The set time is automatically saved to memory after approximately 5seconds.

Automatic shut-off function

While the appliance is turned on, press the TIMER B6 button. The indicator light B11

will be lit, meaning that the appliance is set to the automatic shut off mode. Use buttons

◄/► to set the time after which the appliance will turn off automatically. You can set

atime from 30minutes to 24hours, initially in 30-minute increments (up to 10hours)

and then in 1-hour increments.

The set time is automatically saved to memory after approximately 5seconds and the

display B9 will show the set humidity.

Note:

If you set both automatic start and shut off in the same selected mode, the

B10 andB11 indicator lights will be lit.

If you turn the appliance on or off, while the automatic start or shut-off is

set, the appliance will automatically cancel the start or shut-off function.

If the message "P2" appears on the display B9, the automatic start / shut-off

function will be cancelled.

Cleaning the filters

After approximately 250hours of operation, the indicator light above button FILTER B3

will be lit, signalling that the filter requires cleaning.

Clean the filter according to the instructions in chapter "Cleaning and maintenance".

Then press button FILTER B3 to reset the operating time counter. The indicator light

above the FILTER B3 button will turn off.

Full condensate tank indicator

When the indicator light B12 is lit on the control panel A2, the condensate tank A3

is full and the condensate needs to be emptied out. The appliance will stop running.

Empty out the condensate tank A3 according to the instructions in chapter "Draining

condensate into the tank". After installing the condensate tank A3 the appliance will

automatically start up again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SDH 3020 in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor SDH 3020 Manual

Product: