SPECIFIC INFORMATION FOR APPLIANCES USING REFRIGERANT GAS R290
■Carefully study all the warnings.
■For defrosting and cleaning, do not use any other tools than those recommended by the manufacturer.
■This appliance must be located in an environment that has no continuously running fire sources (for example an open fire, agas appliance or electrical appliances).
■Do not perform any drilling and do not burn it.
■Refrigerant gases may be odourless.
■This appliance must be located in rooms with an area greater than 4m2.
■This appliance contains approx. 100g of refrigerant gas R290.
■R290 is arefrigerant gas that meets European environmental protection directives. Do not make holes or drill into any part of the cooling circuit.
■The room in which this appliance is installed, operated or stored must prevent the collection of such leaked refrigerants, that could be the cause of explosion or fire as aresult of the
refrigerant igniting following the start up of electrical heaters, cookers or other sources of ignition.
■The appliance must be stored in such amanner that its mechanical damage is prevented.
■
Persons working with or repairing cooling circuits must have appropriate authorisation issued by an authorised institution that certifies this person‘scompetence to work with
refrigerants in accordance with the specific assessment of the association for this sector.
■Maintenance tasks must be performed solely on the basis of the recommendations of this appliance‘smanufacturer. Maintenance and repair tasks that required the contribution of
other qualified expert personnel may only be performed under the supervision of specialised experts in the flammable refrigerants sector.
■Adhere to national codes relating to gas.
■Do not cover the vents.
■Notes about fluorinated gases
- Fluorinated greenhouse gases are contained in ahermetically sealed device. To obtain specific information regarding the type and the fluorinated greenhouse gas equivalent of
CO2 in tonnes (on certain models), please refer to the relevant label on the appliance.
- Installation, service, maintenance and repairs of the appliance must be performed only by acertified technician.
- Removal and recycling of the appliance must only be performed by acertified technician.
Symbols than may be found on the appliance.
WARNING
This symbol indicates that this appliance uses aflammable refrigerant. If refrigerant were to leak and subsequently be exposed to an external
source of heat, this would present afire hazard.
ATTENTIONThis symbol indicates that the user'smanual should be studied carefully.
ATTENTIONThis symbol indicates that aservice technician can work on this appliance, while respecting the installation instructions.
ATTENTIONThis symbol indicates the availability of information in the form of auser'smanual and installation instructions.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Sencor SDH 3020 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Sencor SDH 3020 in the language / languages: English as an attachment in your email.
The manual is 1,2 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
