528684
9
Zoom out
Zoom in
Previous page
1/16
Next page
6. Display lighting
DIGI MASTER is equipped with a back-
ground illumination for LCD. Electro
luminescence ''ECLAT" illuminates the
LCD while the display-light key (D.L.) is
depressed (Fig. 12).
7. Running-lock for continuous
reading
The measuring switch can be locked for
continuous reading for ambient light.
(1) Switch the meter ON.
(2) Rotate the switch knob clockwise
until the slit on the knob matches to
the white dot while depressing the
knob.
(3) Release the locking function after the
reading is over. While the measuring
switch is locked, auto shut-off
function does not work.
<NOTE>
Running-lock is only usable for
ambient light measurement, not for
flash light.
14
Wireless (cordless) Measurement using
Electronic Flash Unit
In case the photographing subject is too far to use synchro cord, or in case
the synchro cord disturbs photographing, flash light can be measured
without connecting the cord.
(2) Set the film speed (ISO) and
shutter speed (T) as shown in the
paragraphs for “Preparing the
Meter for Operation”.
(4) While the symbol is flashing (for
about 90sec.), fire the flash unit
by pressing its test button.
(5) The appropriate F-stop value is
displayed on the meter. The
measured value is indicated in dual
display by F-stop number with bar
symbols and bar-dot symbol marks
(Fig. 15).
The display continues to indicate the
measured value for about 5 minutes
after measurement unless the
following measurement is made.
After this period of time the auto
shut-off circuit operates and turns
the display off.
15
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sekonic L-718 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sekonic L-718 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info