528684
7
Zoom out
Zoom in
Previous page
1/16
Next page
Preparing the Meter for Operation
1. Insert the batteries
DIGI MASTER requires 2 pcs of AA
size pen-light battery (1.5V x 2).
(1) Open the battery chamber cover by
sliding it in the direction of arrow.
(2) Insert the batteries carefully aligning
(+) and (-) polarities as indicated
inside the chamber.
(3) Replace the cover by sliding it and
inserting its notch into the slot of the
meter.
< NOTE >
After changing the batteries, please
switch the meter ON once, and then
OFF. It prevents the unexpected
battery consumption that may occur
depending on the status of electric
circuit of the meter.
When not using the meter for a week
or more, remove the batteries from
the meter. It prevents any internal
damage arising from battery leakage.
2. Checking the batteries
Check the battery capacity before using
the meter. A weak battery does not
assure the correct light readings.
(1) Slide the power switch to ON
position. Then b.c. and dot symbol
marks are displayed for about
0.5sec. to indicate the battery level
(Fig. 1). If the battery is too weak to
give a correct light reading, the b.c.
mark flashes.
(2) After checking (for about 0.5sec.),
the display is automatically
changed to the measuring mode
(Fig. 2). If you wish to keep the b.c.
and dot marks indicating, switch
the meter ON while depressing ISO
key. The marks keep indicating
until you stop depressing the ISO
key
10
(3) DIGI MASTER is equipped with auto
shut-off function. If you leave the
meter inactive for about 5 minutes,
the power is automatically switched
off. If you wish to use the meter
again, slide the power switch back to
OFF position once and then switch
the meter on again.
3. Selecting measuring mode
11
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sekonic L-718 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sekonic L-718 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info