528684

Sekonic L-718 Manual

6
Zoom out
Zoom in
Previous page
1/16
Next page
Accessories
1. Lumisphare
Use Lumisphare when you wish to
measure incident light for portraits and
three-dimensional subjects.
< Mounting >
Match the red dot on the Lumisphare
frame to the setting mark on the swivel
head. Gently rotate the sphare
clockwise until it clicks securely into
place. To remove, rotate the sphare
counter-clockwise.
<Taking measurements>
Point the Lumisphare accurately toward
the camera from the subject position.
Swivel head is rotatable 270°
horizontally and 90° upward.
2. Lumidisc
Use Lumidisc when you wish to
measure lighting contrast and lux as
well as the exposure of single-
dimensional subjects.
< Mounting >
Same as for the Lumisphare.
<Taking measurements>
Hold the meter at the subject position and
point the Lumidisc accurately toward the
light source. When measuring the
exposure of two-dimensional subjects,
point the Lumidisc toward the camera
from the subject position.
8
3. Reflected-light filter
Use Reflected-light filter when you wish
to measure the reflected light
(brightness) of subject. Use it to
calculate the relative brightness ratio
(illumination contrast of subject) for
adjusting lighting balance, or when it is
difficult to take incident light
measurement.
< Mounting >
Same as for the Lumisphare.
<Taking measurements>
Point the reflected-light filter accurately
toward the subject. When you wish to
measure some part of the subject, do
so as close to the subject as possible.
4. Viewfinder 5°
(sold separately)
Use Viewfinder in the same way as the
reflected-light filter to measure reflected
light. With a light acceptance angle of 5°
you can make a spot measurement of
distant subjects.
5. Synchro cord
(sold separately)
Synchro cord connects the meter to the
flash unit for measuring flash light in
wired measurement mode. Synchro cord,
5 meters length, has 3 plugs so that it
can simultaneously synchronize the
meter with the flash unit and the camera.
The terminal on the meter has a locking
mechanism to ensure a secure
connection. To disconnect the cord,
simply pull the ring attachment toward
you to release the locking mechanism.
9
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sekonic L-718 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sekonic L-718 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info