528662

Sekonic L-478DR Manual

28
Zoom out
Zoom in
Previous page
1/72
Next page
28
5-1-2. F (f-stop) Priority Mode
1. Touch the Measuring mode icon to open the
Measuring Mode Selection Screen, then touch
the
icon to select F Priority Mode and
return the screen view to Measuring screen (See
P25 for details.)
2. Set the ISO sensitivity value on the ISO icon.
3. Set the f-stop (aperture) value on the F icon.
4.
Press the Measuring button
8
on the side of meter.
Release the Measuring button
8
to complete
the measurement. The measured shutter speed
value at that time will be displayed.
While pressing the Measuring button
8
, the
meter measures continuously until it is released.
5-1-3. TF Priority Mode
TF Mode is useful for today’s digital cameras when a xed speed and aperture are desired and the
ISO can be adjusted for proper exposure. (See Custom Setting Function P55 to activate TF mode
Icon.)
1. Touch the Measuring mode icon To open the
Measuring Mode Selection, then touch the
icon to select TF Priority Mode and
return the screen view to Measuring screen.
(See P25 for details.)
2. Set shutter speed on the T icon.
3.
Set f-stop on the F icon.
4.
Press Measuring button
8
on the side of meter
Release the Measuring button
8
to complete
the measurement. The measured ISO sensitivity
value at that time will be displayed.
While pressing the Measuring button
8
, the
meter measures continuously until it is released.
5-1-4. Illuminance/Luminance Mode
Illuminance can be measured using the incident light mode and luminance can be measured
using the reected light attachment (5-degree viewnder sold separately). The following are the
units that can be set.
Incident light measurement (Illuminance)
•
Lux (Unit: lx)
•
Foot-candle (Unit: fc)
Reected light measurement (Luminance)
•
Candela per square meter (Unit: cd/m
2
)
•
Foot-lambert (Unit: )
<
•
Any calibration or exposure compensation will not be in eect with illuminance/luminance measurements.
Measured value (shutter speed)
Measured value (ISO)
Mesuring Screen
(F Priority Mode)
Setting
Value
Setting value
Measuring
Value(f-stop)
Mesuring Screen
(TF Priority Mode)
… 28 …


Need help? Post your question in this forum.

Forumrules
1

Forum

sekonic-l-478dr

Reset search

  • Sekonic L478 DR
    The CH/ZONE setting is greyed out making it unavailable to set channel or zone. I have tried different settings in custom etc but not working. The unit it's new.
    Anyone know the answer? Submitted on 16-1-2022 at 06:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sekonic L-478DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sekonic L-478DR in the language / languages: English as an attachment in your email.

The manual is 8,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sekonic L-478DR

Sekonic L-478DR User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info