528662

Sekonic L-478DR Manual

27
Zoom out
Zoom in
Previous page
1/72
Next page
27
5 Measuring
5-1. Measuring in Ambient Light Mode
Continuous light like natural light (sunlight) as well as tungsten lamps and uorescent
lamps are measured in Ambient Light Mode.
The following are the measuring methods in the Ambient Light Mode.
•
T (shutter speed) priority
•
F (stop) priority
•
TF (EV) priority
•
Illuminance lux independent display
•
Illuminance fc independent display
•
Luminance cd/m
2
independent display (with reected light attachment sold separately)
•
Luminance  independent display (with reected light attachment sold separately)
See 4-3 “Setting Measuring Mode” (P25) for details on changing measuring mode.
<
•
Shutter speed and f-stop (aperture) values can be displayed in full, ½ and 1/3 stop increments in Custom Setting (See
P55 for details.)
•
After taking a measurement, changing a T or F setting value will also change the measured value.
•
Touching the Average/ΔEV button ( ) at the bottom of the screen activates the Contrast Function. (See P50 for
details.)
•
e Analog Scale display will change according to Measuring Mode, Incident/Reected and Mid-Tone mode selected
as well as “Set Analog Scale” in Menu list (See P19 and P53 for details.)
•
See P42 for details about reading outside the display range or beyond the measuring range.
5-1-1. T (Shutter Speed) Priority Mode
1. Touch the Measuring mode icon to open the
Measuring Mode Selection Screen, then touch
the
icon to select T Priority Mode and
return the screen view to Measuring screen. (See
P25 for details.)
2. Set the ISO sensitivity value on the ISO icon.
3. Set the shutter speed on the T icon.
4. Press the Measuring button
8
on the side of
meter.
Release the Measuring button
8
to
complete the measurement. The measured
f-stop (aperture) value at that time will be
displayed.
While pressing the Measuring button
8
, the
meter measures continuously until it is
released.
Measured value (f-stop)
Mesuring Screen
(T Priority Mode)
Setting
Value
… 27 …


Need help? Post your question in this forum.

Forumrules
1

Forum

sekonic-l-478dr

Reset search

  • Sekonic L478 DR
    The CH/ZONE setting is greyed out making it unavailable to set channel or zone. I have tried different settings in custom etc but not working. The unit it's new.
    Anyone know the answer? Submitted on 16-1-2022 at 06:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sekonic L-478DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sekonic L-478DR in the language / languages: English as an attachment in your email.

The manual is 8,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sekonic L-478DR

Sekonic L-478DR User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info