528662

Sekonic L-478DR Manual

26
Zoom out
Zoom in
Previous page
1/72
Next page
26
About Measuring Modes
Mode No. Icon Explanation
Ambient Light
Mode
1
T (shutter speed) priority
Displays f-stop (aperture) value for input shutter speed and ISO
sensitivity. (See P27 for details.)
2
F (stop) priority
Displays shutter speed value for input f-stop and ISO sensitivity.
(See P28 for details.)
3
TF (shutter speed and f-stop) priority
Displays ISO sensitivity value for input shutter speed and f-stop. (See
P28 for details.)
4
HD Cine mode
Displays f-stop value for input shutter speed, ISO sensitivity and frame rate
(f/s). (See P32 for details.)
5
Cine mode
Displays f-stop value for input frame rate (f/s), ISO sensitivity and shutter
angle. (See P31 for details.)
6
Illuminance (lux) mode
Displays brightness value in lux unit in incident light. (See P29 for details.)
Illuminance (fc) mode
Displays brightness value in foot-candle (fc) unit in incident light. (See
P29 for details.)
Luminance (cd/m
2
) mode (with 5-degree viewnder sold separately)
Displays brightness value in cd/m
2
unit in reected light. (See P30
for details.)
Luminance () mode (with 5-degree viewnder sold separately)
Displays brightness value in foot-lambert () unit in reected light.
(See P30 for details.)
Flash Light Mode
7
Cordless ash mode
Detects ash brightness without meter-ash connection after measuring
button pressed to arm meter for 90 seconds and ash red separately.
Displays f-stop (apertures) value for input shutter speed and ISO
sensitivity. (See P35 for details.)
8
Cordless multiple (cumulative) ash mode
Detects ash brightness without meter-ash connection after measuring
button pressed to arm meter for 90 seconds and ash red separately.
Displays f-stop (apertures) value for input shutter speed and ISO sensitivity.
(See P37 for details.)
9
Cord (PC) ash mode
Detects ash brightness with PC cord meter-ash connection.
Displays f-stop (apertures) value for input shutter speed and ISO
sensitivity. (See P34 for details.)
10
Cord multiple (cumulative) ash mode
Detects and accumulates ash brightness with PC cord meter-ash
connection.
Displays f-stop (apertures) value for input shutter speed and ISO sensitivity.
(See P36 for details.)
11
Radio triggering mode *L-478DR only
Detects ash brightness without meter-ash connection after radio
transmitted trigger signal is received by PocketWizard
®
radio-receiver
connected ash.
Displays f-stop (apertures) value for input shutter speed and ISO sensitivity.
(See P41 for details.)
12
Radio triggering multi (cumulative) ash mode *L-478DR only
Detects and accumulates ash brightness without meter-ash
connection after radio transmitted trigger signal is received by radio-
receiver connected ash
Displays f-stop (apertures) value for input shutter speed and ISO
sensitivity. (See P42 for details.)
<
•
Ambient Light refers to natural light (sunlight) as well as continuous light like tungsten lamps and uorescent lamps.
•
Flash refers to momentary light such as that produced by a ashlight or ash bulb.
•
If all light measuring modes are turned OFF, Ambient Light T priority will be selected.
… 26 …


Need help? Post your question in this forum.

Forumrules
1

Forum

sekonic-l-478dr

Reset search

  • Sekonic L478 DR
    The CH/ZONE setting is greyed out making it unavailable to set channel or zone. I have tried different settings in custom etc but not working. The unit it's new.
    Anyone know the answer? Submitted on 16-1-2022 at 06:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sekonic L-478DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sekonic L-478DR in the language / languages: English as an attachment in your email.

The manual is 8,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sekonic L-478DR

Sekonic L-478DR User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info