757456
10
Zoom out
Zoom in
Previous page
1/15
Next page
18
English
19
English
DISPLAY AFTER A DIVE
Current depth
When you are less than 1.5 m (5 ft) underwater and
the auto switch senses water:
The watch shows the dive display with the current depth being
“0.0 m (0 ft)”.
If the watch shows the dive display after you surface, check
that water does not remain on the auto switch.
If the watch measures the current depth of greater than 1.5 m
(5 ft) within 10 minutes after this display is shown, the
previous and the new dives are considered inseparable, and
the dive times of both dives and the surface interval time are
added together.
Indication DescriptionWarning
Ascent rate warning
(flashing)
WARNINGS DURING A DIVE
If you ascend in water at a rate greater than the specified one, flashing “SLOW”
appears for 5 seconds and the warning sound beeps for 3 seconds.
Three rates are specified depending on the depth level.
0.0 ~ 5.9 m (0 ~ 19 ft) : 8 m (26 ft)/min
6.0 ~ 17.9 m (20 ~ 59 ft) : 12 m (39 ft)/min
18.0 m (60 ft) and deeper : 16 m (52 ft)/min
* The watch calculates the ascent rate by measuring the current depth every 6 seconds.
Decompression
warning
Decompression stop
violation warning
(flashing)
If you accidentally exceed the no-decompression limit, the watch is shifted to the
decompression mode, flashing “DECO” is shown, and the warning sound beeps
for 3 seconds.
If you ascend to a depth shallower than the decompression stop depth that the
watch indicates, it gives a decompression stop violation warning. The current
depth, decompression stop depth, decompression stop time and “DECO” all
flash, and the warning sound beeps for 3 seconds.
When you return to a depth deeper than the decompression stop depth, the watch
starts counting down the decompression stop time.
PO2 limit warning
(Warning on partial
pressure of oxygen)
(flashing)
If the partial pressure of oxygen (PO2) reaches 1.5, the warning sound beeps for
3 seconds. By pressing and holding button C to show PO2, you can see some of
the oxygen limit indicators flashing.
If PO2 exceeds 1.6, the “O2” mark starts flashing, and the warning sound beeps
for 3 seconds. By pressing and holding button C to show PO2, you can see all the
oxygen limit indicators flashing.
OLI warning
(Warning on oxygen
limit)
It appears when all the oxygen limit indicators are flashing.
(flashing)
Out of range warning It appears when the measurement exceeds the specified value as follows:
Maximum depth exceeds 99.9 m (328 ft).
Dive time exceeds 599 minutes.
Decompression stop depth exceeds 15 m (50 ft).
Decompression stop time exceeds 99 minutes.
(flashing)
* The watch will not measure the current depth while the warning sound is beeping.
When you are less than 1.5m underwater or on the
surface and the auto switch does not sense water:
TIME/CALENDAR display
Desaturation
time
Surface interval
time
Press and hold to show the surface interval time
and desaturation time.
18
English
19
English
HOW TO USE DIVE COMPUTER FUNCTIONS HOW TO USE DIVE COMPUTER FUNCTIONS
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seiko DH33 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seiko DH33 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Seiko DH33

Seiko DH33 User Manual - German - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info