757456
9
Zoom out
Zoom in
Previous page
1/15
Next page
16
English
17
English
After no-decompression limit reaches “0”
(during decompression diving):
Never dive beyond the no-decompression limit.
Residual nitrogen indicator
Dive time
Current depth
Total ascent timeDecompression
stop depth
Decompression stop time
Decompression diving mark
When the no-decompression limit reaches “0” while
diving, all the residual nitrogen indicators are displayed
to indicate that the watch has shifted to decompression
diving mode.
After you make decompression stops as indicated by the
watch, it will resume calculation of no-decompression
diving.
Total ascent time refers to the minimum time required to
stay underwater before surfacing, including the
decompression stop time at the indicated decompression
stop depths.
Do not make a decompression stop at a depth
shallower than the decompression stop depth the
watch indicates. It is in violation of the decompression
stop warning, and the watch will not count down the
decompression stop time and total ascent time even
if you make a stop during ascent.
Even after the watch has given a decompression stop
violation warning, it will resume calculation of no-
decompression diving if you return to the indicated
decompression stop depth and make a decompression
stop as indicated by the watch. If you continue
ascending and surface, defying the warning, the
watch cannot be used for diving for 48 hours. During
that time period, the watch is not set to calculate
decompression diving, and only the surface interval
and dive log displays are shown. If the aquatic
environment permits, it is recommended that you
make a decompression stop at a depth 1 to 2 m (3 to
7 ft) deeper than the indicated decompression stop
depth. In that case, take care that you should stay at
the depth for a longer time period than the
decompression stop time that the watch indicates.
WARNING
The auto switch (water contact sensor) senses water and automatically activates the DIVE FUNCTION, showing the DIVE display. There
is no need to change the displays manually.
As you descend to 1.5 m (5 ft) underwater, the watch starts showing the current depth and measuring the diving time.
During a dive, the watch automatically measures depth, water temperature and dive time, and provides the information necessary for
diving including warnings on hazards.
WARNING
Before making a dive, be sure to check the function of
your watch, following the instructions set forth in
“BEFORE DIVING” in “PRECAUTIONS FOR DIVING” on
page 4.
Also, be sure to set FO2 according to the gas mixture of
your scuba tank. FO2 cannot be re-adjusted while you
are underwater.
Select the measurement units of depth and temperature
as you require. They cannot be selected while you are
underwater.
DISPLAY WHILE DIVING
Residual nitrogen indicator Oxygen limit indicator
During no-decompression diving
No-decompression limit Dive time
Current depth
Water temperature
Maximum depth
Press to illuminate the display for 2 to 3 seconds.
* The illuminating light will not stay lit if the button is kept
pressed.
Press and hold to display current time, partial
pressure of oxygen (PO2) and data.
* The display is illuminated for 2 to 3 seconds.
Current time
Partial pressure of
oxygen (PO2)
FO2 you have set
16
English
17
English
DIVE FUNCTION
HOW TO USE DIVE COMPUTER FUNCTIONS HOW TO USE DIVE COMPUTER FUNCTIONS
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seiko DH33 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seiko DH33 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Seiko DH33

Seiko DH33 User Manual - German - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info