550298

Scubapro MERIDIAN Manual

40
Zoom out
Zoom in
Previous page
1/58
Next page
40
3. Meridian as a dive computer
SCUBAPRO MERIDIAN
3. Meridian as a dive computer
accordingly, basically reflecting the fact that 
you will finish the dive using Gas 1 only.
F
NOTE: if after Meridian has changed
the decompression schedule to reflect
the missed gas switch, you descend
again below the MOD for Gas d,
Meridian reintroduces Gas d into the
calculations and the decompression
schedule changes accordingly.
Delayed gas switch
You can catch up on a planned gas mixture 
switch  at  any  time  by  selecting  the  gas 
manually. Press and hold SEL/ESC button 
to start the gas switch procedure. Meridian 
will  show  the  text  Gas d  and  its  MOD 
flashing on the display. This helps you verify 
that you are performing a switch to a safe 
gas. At this point press SEL/ESC button 
to confirm the switch. Meridian will display 
the text Gas d without flashing and adapt 
the decompression schedule accordingly. 
Submerging below the MOD after a
gas switch
If  after  having  switched  to  Gas  d  you 
inadvertently drop again below the MOD for 
that mixture, the MOD alarm will immediately 
go  off.  Either  switch  back  to  Gas  1,  or 
ascend above the MOD for Gas d.
3.11 Warnings and alarms
Meridian  can  alert  you  of  potentially 
dangerous  situations  via  warnings  and 
alarms. You can only modify the warning
and alarm settings via PC interface.
Warnings  represent  situations  that  require 
the  diver’s  attention,  but  ignoring  them 
does not represent an immediate risk. It is 
up to you to decide  which ones you would 
like to  be  active  and  which  ones not. The 
available warnings are:
3.11.1 CNS O
2
= 75%
Meridian tracks your oxygen uptake via the 
CNS  O
2
  clock.  If  the  calculated  value  of 
CNS O
2
 reaches 75%, Meridian will emit a 
sequence of audible beeps for 12 seconds 
and the value of the CNS O
2
 will be flashing 
in  the  lower  right  corner.  The  flashing  will 
continue  until  the  value  of  CNS  O
2
  drops 
under 75%.
CNS O
2
 = 75%
3.11.2 No-Stop time = 2 minutes
If  you  wish  to  avoid  unintentionally 
performing a decompression dive, Meridian 
can  activate  a  warning  when  the  no-stop 
time  reaches  2  minutes.  This  applies  to 
both L0 no-stop and MB no-stop time (see 
chapter  3.11.15 Diving with MB levels
for more information on MB level diving). It 
gives you the opportunity to start ascending 
before incurring a decompression stop or a 
level stop obligation. 
No-Stop time = 2 minutes
Meridian  emits  a  sequence  of  audible 
beeps for 12 seconds and the no-stop time 
will flash. The flashing will continue until you 
ascend sufficiently for the  no-stop  time  to 
grow to 3 minutes, or until Meridian enters 
into decompression. 
… 40 …


Need help? Post your question in this forum.

Forumrules
1

Forum

scubapro-meridian

Reset search

  • Hi. What is error message E37 on the Meridian. Just did a dive and computer would not go into dive mode. When I came out it said E 37 Submitted on 27-4-2024 at 12:45

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scubapro MERIDIAN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scubapro MERIDIAN in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scubapro MERIDIAN

Scubapro MERIDIAN User Manual - German - 58 pages

Scubapro MERIDIAN User Manual - Dutch - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info