Manual Scholtes til 642 (page 25 of 72) (English, German, Dutch, French, Italian)

332166

Zoom out

Zoom in

1/72

To modify the duration set previously, press the

button at the side of the display corresponding to

the cooking zone being used.

Press the

and buttons to select the

DURATION option and press OK to confirm.

Adjust the minutes by pressing the

and buttons

at the side of the display and press OK to modify

the time.

! During the setting process, press the

and buttons

at the side of the display to reset the time value to zero.

To display the previously set function during the

cooking programme, press the

button at the side of the display corresponding to

the cooking zone being used. The display will show

the name of the active function and the remaining

time, if set.

! The power level of the cooking zone cannot be modified

while any of the CookEye

functions are in operation.

! If the manual controls are not adjusted, the

automatic control maintains its temperature and both

the visual and sound alarms continue. If you do not

interrupt this automatic process within ten minutes,

the hotplate switches off.

! The buzzer may be stopped by pressing any

button on the hob.

! Do not use Cookeye

with a lid over the cookware

or a utensil inside it (ladle, spoon, whisk, etc.). Make

sure that steam from the pan is not blown towards

the Cookeye

lens, as this could disrupt its

observation function.

Switching off the Cookeye

Press and hold the red button for 3 seconds.

Alternatively, press the

button at

the side of the display corresponding to the cooking

zone being used.

Press the

and buttons to select the active

function and press OK to confirm.

Select the OFF option by pressing the

and

buttons at the side of the display and press the

OK button to stop the active function.

Clipso Eye function

Enables completely automated pressure cooking.

The Clipso Eye module should be used with the

Clipso Control pan to automatically regulate

pressure and to automatically switch the hotplate off

after the cooking programme has ended.

Starting the Clipso Eye function

! The Clipso Eye module can only be used with the

Clipso Control pan.

1. Insert the Clipso Eye into the space provided in

the Clipso pan.

2. Switch on the hob and put the Clipso pan on one

of the two cooking zones at the rear right hand side

or the front left hand side of the hob..

3. Press the on/off button on the Clipso Eye.

4. The display shows SELECT A COOKING ZONE

and the 2 hotplate selection buttons at the side of

the display will flash at the same time.

5. Select one of the 3 cooking programmes on the

lid of the Clipso pan.

6. The display requests that a duration is set. Adjust

the minutes by pressing the

and buttons at the

side of the display and press OK to confirm.

Cooking with Clipso Eye

Cooking will start

automatically once the

programme has been

confirmed. The power level

indicators for the relevant

hotplate will remain lit and the

following symbol will be

shown on the module display:

(see diagram).

Once the optimal pressure has been reached (the

pan releases steam) the timer begins to count down

automatically. At the end of the cooking programme,

the buzzer sounds and the hotplate switches off.

The Clipso Eye module remains active. For

instructions on how to switch it off, please refer to

the paragraph entitled Deactivating the Clipso Eye.

! The buzzer may be stopped by pressing any

button on the hob.

Infrared LED

On/Off button

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scholtes til 642 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scholtes til 642 Manual

Product: