335562

Scholtes ti 7624 nr Manual

19
Zoom out
Zoom in
Previous page
1/60
Next page
GB
19
Practical advice on using the appliance
! Use cookware made from materials that are
compatible with the induction principle (ferromagnetic
material). We especially recommend pans made from:
cast iron, coated steel or special stainless steel
adapted for induction. Us ea magnet to test the
compatibility of the cookware.
In addition, to obtain the best results from your hob:
Use pans with a thick, flat base to fully utilise the
cooking zone.
Always use pans with a diameter that is large
enough to cover the hotplate fully, in order to use all
the available heat.
Make sure that the base of the cookware is always
dry and clean, to fully utilise and extend the life of
both the cooking zones and cookware.
Avoid using the same cookware that has been used
on gas burners: the heat concentration on gas
burners may deform the base of the pan, causing it
not to fit correctly.
Safety devices
Pan sensor
Each cooking zone is fitted with a pan sensor device.
The hotplate only emits heat when a pan with suitable
measurements for the cooking zone is placed on it. If
the indicator light is flashing, it may indicate:
an incompatible pan
a pan that is too small
the pan has been taken away
Residual heat indicators
After the pan has been removed from one of the
cooking zones, the word "HOT" will flash on the
display until the temperature of that particular zone
has fallen below 60°C. This reduces the risk of burns
and scalds.
When the cooking zone has been programmed, the
display alternates between the word "HOT" and the set
period of time.
Overheating protection
If the electronic elements overheat, the hob switches
off automatically and  appears on the display.
When the temperature has reached an appropriate
level, this message disappears and the hob may be
used again.
Safety switch
The appliance has a safety switch that automatically
switches off the cooking zones when they have been
in operation for a certain amount of time at a given
power level. When the safety switch has been
triggered, the display shows 0.
For example: the right rear hotplate is set to 5 and will
switch off after 3 hours of continuous operation, while
the front left hotplate is set to 2 and will switch off after
10 hours.
Buzzer
This can indicate several irregularities:
an object (a pan, cutlery, etc.) has been placed on
the control panel for more than 10 seconds
something has been spilt on the control panel
a button has been pressed for too long
All the above can cause the buzzer to sound.
Remove the cause of the malfunction to stop the
buzzer. The control panel locks automatically in
these situations: to unlock it press the button [key
icon], the settings will have been maintained. If the
cause of the problem is not removed, the buzzer will
keep sounding and the hob will switch off.
*
SUITABLE
UNSUITABLE
Cast iron
Enamelled steel
Special stainless steel
Copper,
Aluminium, Glass, Earthenware,
Ceramic, non magnetic Stainless steel
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scholtes ti 7624 nr at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scholtes ti 7624 nr in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info