781891

Scheppach WDS 999 Kraft Werkzeuge Manual

20
Zoom out
Zoom in
Previous page
1/36
Next page
20 І 36
to the transport company which was used to deliver
the power tool.
• Avoid long supply lines (extension cables).
• Do not operate the power tool in a damp or wet room.
• The power tool may only be operated in suitable
rooms (well ventilated).
8. Attachment and operation
m IMPORTANT!
You must fully assemble the appliance before us-
ing it for the rst time!
m WARNING!
Neither power tools nor packaging materials are
toys! Children must not play with plastic bags,
foils and small parts! Danger of swallowing and
suffocation!
m Before you connect the equipment to the mains
supply make sure that the data on the rating plate are
identical to the mains data.
m WARNING! Always pull the power plug before
making adjustments to the equipment.
8.1. Installation (g.1-3)
-Fold the front and back part together. And then
tighten the wing nut (3).
Fitting the telescopic extension (g. 4)
Insert the telescopic extension (11) into the connec-
tion for the telescopic extension (12) and lock it by
twisting as shown in Fig. 4.
Note: Adjust the Telescopic Plasterboard Sander
with the telescopic extension (11) so that you can
work with it most comfortably. The machine can also
be used without telescopic extension.
8.2. Selecting the right abrasive paper
1. The grain size of the sandpaper is specied on
its rear side. The smaller the specied number,
the coarser the graining.
2. Use sandpaper with coarse grain for rough grind-
ing, and sandpaper with ne grain for nishing.
We recornrnend sandpapers with aluminium ox-
ide, silicon carbide or other synthetic abrasives.
3. lf you can chose between sandpapers with dif-
ferent graining, you should start with coarse
graining sandpaper and complete the grinding
process with the nest possible graining. Thus
you will get good and smooth grinding results.
8.3. Attaching and replacing the sanding paper
Apply the sandpaper (16) to the grinding plate (1) us-
ing the Velcro strip mechanism.
1. Align the sandpaper (16) with the grinding plate
(1) and press it on evenly.
2. PuII the sandpaper (16) off the grinding plate
(1) and replace it with a new one or another one
(Fig.7).
6. Technical data
Mains connection 230-240 V~ 50Hz
Motor rating W 710
Operating mode S1
Nominal speed
(oscillation rate) n 700-1700 min-1
Spindle size M 14
Grinding disc diameter Ø 225 mm
Abrasive paper diameter Ø 225 mm
Protection class II /
Weight in kg ca. 4,5 kg
Sound pressure Ievel LpA 91 dB(A)
Sound power Ievel LWA 102 dB(A)
Uncertainty K (KpA / KWA) 3 dB(A)
Hand-Arm-Vibration
When grinding with abra-
sive sheets,DS 3,24 m/s²
Uncertainty K 1,5 m/s²
The specied hand-arm vibration value is based on
grinding with an abrasive sheet. Different applications
may result in different values.
The noise and vibration values were determined ac-
cording to EN 60745-1 and EN 60745-2-3.
The specied vibration value was measured an the
basis of a standard test method and can be used to
compare any kind of power tools.
The specied vibration value can also be used for the
initial evaluation of exposure.
m WARNING! Depending on how you use the
power tool, the actual vibration values may
deviate from the specied values!
Take measures to protect yourself against
vibrations!
Make sure to take into account the entire work
process, i.e. also times when the power tool
is operated without Ioad or switched off!
Appropriate measures include the regular
maintenance and care of the power tool and its
attachments, keeping your hands warm, regular
breaks and well planned work processes!
Wear hearing protection.
The effects of noise can cause a loss of hearing.
7. Before starting the equipment
Before you connect the equipment to the mains sup-
ply make sure that the data on the rating plate are
identical to the mains data.
• Check the equipment for damage which may have
occurred in transit. Report any damage immediately
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach WDS 999 Kraft Werkzeuge at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach WDS 999 Kraft Werkzeuge in the language / languages: English, German, French as an attachment in your email.

The manual is 2.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info