Manual Scheppach WDS 999 Kraft Werkzeuge (page 18 of 36) (English, German, French)

781891

Zoom out

Zoom in

1/36

18 І 36

e) The outer diameter and the thickness of the

insertion tool must comply with the dimen-

sions specied on your power tool.

lt is not possible to shield or control insertion

tools with different dimensions.

f) Grinding disks, anges, grinding plates or

other accessory parts must exactly mate the

grinding spindie of your power tool.

nsertion tools which do not exactly mate the

grinding spindle of your powertool will perform ir-

regular rotations, cause high vibrations and thus

the loss of control.

g) Do not use damaged insertion tools.

Prior to each application, you must check inser-

tion tools such as grinding disks for chippings and

cracks, grinding plates for cracks, wear or major

abrasion, wire brushes for loose or broken wires. lf

the power tool or insertion tool falls down, you must

check it for damages, or use an undamaged inser-

tion tool. After you have checked and inserted the

insertion tool, both you and persons in the vicinity

must stay out of the Ievel of the rotating insertion

tool, and the tool must be operated at maximum

speed for one minute. Most of the damaged inser-

tion tools will break within this test period.

h) Wear personal protective equipment.

Depending on the application of the power tool,

you must wear a full face shield, eye protection

or goggles. lf appropriate, you must wear a dust

mask, hearing protection, protective gloves or a

special apron which protects you against small

grinding chips and material particles. Protect your

eyes against foreign objects which y off du ring

different operations. The purpose of dust masks

and breathing equipment is to lter the dust gener-

ated during the operation. Long-term exposure to

high noise pollution may cause hearing loss.

i) Make sure that other persons stay a safe dis-

tance away from your working area.

Persons accessing your working area must wear

personal protective equipment. Fragments of the

work piece or broken insertion tools may y off

and cause injury even outside the direct working

area.

j) Always hold the tool by its insulated han-

dles when the insertion tool may come into

contact with hidden power lines or with the

power cord of the power tool.

Contact with live lines may energise metal tool

parts and cause electric shock.

k) Keep the power cord away from rotating in-

sertion tools.

lf you lose control of the power tool, the power

cord may be cut or trapped, and your hand or

arm may get into the path of the rotating inser-

tion tool.

l) Never put aside the power tool before the

complete halt of the insertion tool.

Rotating insertion tools may get in contact with

the place of deposit thus causing the loss of con-

trol of the tool.

d) Keep power tools which are not in use away

from children.

Only persons who are familiar with the power

tool and who have read the operating instruc-

tions may use the power tool. Power tools are

dangerous if used by inexperienced persons.

e) Maintain power tools with care.

Check moving parts for proper function and

smooth running, and check whether there are

parts which are broken or damaged to the ex-

tent that the functionality of the power tool is

impaired. Have damaged parts repaired before

using the power tool. Many accidents are caused

by poorly-maintained power tools.

f) Keep cutting tools sharp and clean. Carefully

maintained cutting tools with sharp edges

are less likely to jam and can be guided more

easily.

g) Use power tools, accessory parts, insertion

tools, etc. in compliance with these instruc-

tions.

Take into account the working conditions and the

activity which is to be carried out. Using power

tools for applications other than those intended

may cause dangerous Situations.

Service

a) Have your power tool repaired by qualied

specialists only, and always use original

spare parts for repair. This is to maintain the

safety of the power tool.

Safety notes for all applications- General safety

notes for grinding, sanding, working with wire

brushes, polishing and cutting by grinding

a) This power tool must be used as a sandpaper

grinder.

Observe all safety notes, instructions, illustra-

tions and data which are provided together with

the tool. Nonobservance oft he following instruc-

tions may result in electric shock, re and/or se-

vere injury.

b) This power tool is not suited for grinding,

Operations with wire brushes, polishing and

cutting by grinding.

Using the power tool for applications other than

the intended ones may result in risks and injury.

c) Only use accessory parts especially pro-

vided for this tool and recommended by the

manufacturer.

The mere fact that you can mount accessory

parts to your power tool does not ensure safe

use.

d) The permissible speed of the insertion tool

must be at least as high as the maximum

speed specied on the power tool.

Accessories with a higher speed may break and

y off.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach WDS 999 Kraft Werkzeuge in the language / languages: English, German, French as an attachment in your email.

The manual is 2.29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach WDS 999 Kraft Werkzeuge Manual

Product: