Manual Scheppach WDS 999 Kraft Werkzeuge (page 17 of 36) (English, German, French)

781891

Zoom out

Zoom in

1/36

17 І 36

f) lf the operation of power tools in a humid en-

vironment cannot be avoided, you must use

a residual current circuit breaker.

The use of a residual current circuit breaker will

reduce the risk of electric shock.

Personal safety

a) Pay attention to what you are doing and use

power tools sensibly.

Do not use power tools when you are tired or un-

der the inuence of drugs, alcohol or medication.

A single moment of inattention while using power

tools may cause severe injury.

b) Wear personal protective equipment and

safety goggles.

Wearing personal protective equipment such as

a dust mask, non-skid safety boots, a protective

helmet or hearing protection according to the

type and application of the power tool reduces

the risk of injury.

c) Avoid starting the power tool unintentionally.

Make sure that the power tool is switched off be-

fore you connect it to the mains and/or insert a

battery, pick it up or carry it. lf you have your n-

ger on the switch when you carry the power tool,

or if the machine is switched on when you con-

nect it to the mains, this may result in accidents.

d) Remove adjustment tools or wrenches be-

fore switching on the power tool.

Tools or wrenches in rotating machine parts may

cause injury.

e) Avoid abnormal body positions.

Stand securely and keep your balance at all times.

By doing so, you can control the power tool more

easily in unexpected Situations.

f) Wear suitable clothing. Do not wear loose

clothing or jewellery.

Keep your hair, clothing and gloves away from

moving parts. Loose clothing, jewellery or long

hair may be trapped in moving parts.

g) lf dust extraction tools or collection bins can

optionally be attached, you must make sure

that they are connected and correctly used.

Using dust extraction tools may reduce risks

caused by dust.

Use and treatment of the power tool

a) Do not overload the tool.

Use the appropriate power tool for your type

of work. With appropriate power tools, you can

work better and more safely within the given

power range.

b) Do not use power tools with defective switch-

es. Power tools which cannot be switched on

or off are dangerous and must be repaired.

c) PuII out the plug from the socket and/or re-

move the battery before you make settings

to the tool, replace accessory parts or put

aside the power tool.

These precautionary measures will prevent the

power tool from starting unintentionally.

Please note that our equipment has not been designed

for use in commercial, trade or industrial applications.

Our warranty will be voided if the equipment is used

in commercial, trade or industrial businesses or for

equivalent purposes.

5. Safety information

m WARNING! Read all safety warnings and all

instructions. Failure to follow the warnings and in-

structions may result in electric shock, re and/or se-

rious injury.

Save all warnings and instructions for future

reference.

The term “power tool” used in the safety instructions

refers to mains powered power tools (with power

cord) and cordless power tools (without power cord).

Workplace safety

a) Keep your workplace clean and well illumi-

nated.

Disorderliness and poorly illuminated workplac-

es may Iead to accidents.

b) Do not operate the power tool in explosive at-

mospheres with inammable liquids, gases

or dust.

Power tools generate sparks which may ignite

dust or vapours.

c) Keep children and other persons away from

the power tool during operation.

You may lose control of the tool if you are dis-

tracted.

Electric safety

a) The plug of the power tool must t into the

socket.

Do not modify the plug in any way. Do not use

adapter plugs tagether with grounded power

tools. Unmodied plugs and matehing sockets

reduce the risk of electric shock.

b) Avoid body contact with grounded surfaces

such as pipes, radiators, ovens and refrig-

erators. There is an increased risk of electric

shock if your body is grounded.

c) Keep power tools away from rain or humidity.

Water permeation into the power tool will in-

crease the risk of electric shock.

d) Use the cable solely for its intended purpose.

Do not use the cable to carry or hang up the

power tool or to pull out the plug from the

socket.

Keep the cable away from heat, oil, sharp edges

or moving machine parts. Damaged or twisted

cables increase the risk of electric shock.

e) When working outdoors with power tools,

only use extension cords which are suited

for outdoor areas.

Using extension cords suited for outdoor applica-

tions reduces the risk of electric shock.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach WDS 999 Kraft Werkzeuge in the language / languages: English, German, French as an attachment in your email.

The manual is 2.29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach WDS 999 Kraft Werkzeuge Manual

Product: