Manual Scheppach Tisa 3.0 (page 20 of 112) (All languages)

782522

Zoom out

Zoom in

1/112

16 english

Troubleshooting

Failure Possible cause Solution

Saw blade gets loose after a) Fastening nut tightened a) Tighten fastening nut, M20 left-handed thread

turning off the motor insufficiently

Motor does not start a) Fastening nut tightened insufficiently a) Check the mains fuse. b) Extension cable de-

fect b) See “Electrical Connection” in the operating manual, pages GB 16 c) Connections on

the motor or c) Have it checked by an electrician switch defect Brake does not bleed d)

Motor or switch defect d) See “Electrical Connection” in the operating manual, pages GB 16

Motor runs forward or Capacitor defect Have it exchanged by an electrician

backwards

No motor output Overload by dull saw Insert a sharpened saw blade; motor can be

turns off automatically blade, thermoprotection is triggered turned on again after the cooling period

Burns on the cutting a) Fastening nut tightened insufficiently a) Insert a sharpened saw blade

surface b) Wrong saw blade b) Insert saw blade with 20 or 28 teeth for longi-

tudinal cuts

c) with longitudinal cuts c) Longitudinal stop not parallel c) Exchange the longitudinal stop

d) with cross cuts d) Slide carriage not parallel Align the slide carriage with the saw blade

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Tisa 3.0 in the language / languages: All languages as an attachment in your email.

The manual is 2.65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach Tisa 3.0 Manual

Product: