Manual Scheppach SB08 Woodster (page 19 of 48) (English, German, French, Italian)

782162

Zoom out

Zoom in

1/48

Transport

Ne jamais soulever ni transporter la machine en tenant

celle-ci par le cadre ou la plaque de support. Pour le

transport, ne jamais lever la machine aux dispositifs de

protection, aux poignées de réglage ou à la table de scie.

Pour le transport, le capot de protection de la lame doit

se trouver en position basse.

Ne jamais la soulever à hauteur de la table de sciage!

Avant de transporter la machine, il faut toujours la dé-

brancher du secteur.

DESCRIPTION DE LA MACHINE

En raison de sa construction peauﬁnée, la machine offre

un grand nombre de possibilités pour le travail du bois et

des plastiques en atelier.

Les volants de ruban supérieur et inférieur sont protégés

par un capot ﬁxe et par un capot articulé. La partie du

ruban non coupante au-dessus de la table est couverte

par un dispositif de sécurité ﬁxé sur le guide-ruban, lui-

même protégé par le capot ﬁxe du volant supérieur contre

une ouverture par mégarde. La partie non-coupante du

ruban sous le plateau de la table est protégée par un ca-

pot ﬁxe.

La plage de basculement de la table de -5° à +45° per-

met différentes sortes de coupes, par ex. :

• Coupes longitudinales

• Coupes transversales

• Coupes diagonales

• Coupes en forme d’arc et irrégulières

• Coupes pour queues d’aronde et tenons

• Coupes sur chant pour des poutres carrées

Reportezvous à ce sujet aux consignes de travail conte-

nues dans les instructions de service.

Complémentation

OUTIL DE MONTAGE

1 clé à fourche SW 10/13

1 clé mâle à six pans SW 3

1 clé mâle à six pans SW 4

Pour faciliter l’emballage, le dessus de table et les équer-

res de ﬁxation ne sont pas montés

MONTAGE DU PLATEAU DE TABLE FIG. 1, 2, 3

1 Faire passer le plateau de table (A) au-dessus de la

lame de scie à ruban (B) et le placer sur la plaque à

bascule Fig.1

2 Fixer le plateau de table avec 3 vis à tête fraisée

M6x16, 3 rondelles et 3 écrous hexagonaux M6. Ser-

rer légèrement les vis à la main Fig.2

3 Fixer la pièce de renforcement en forme d’U (C) à

l’aide de 2 vis à tête fraisée M6x16 et de 2 écrous

moletés (D) sur la face avant de la table de scie.

Fig.3

Transport

The machine must only be lifted and transported on its

frame or the frame plate. Never lift the machine at the

safety devices, the adjusting levers, or the sawing table.

During the transport the saw blade protection must be in

the lowest position and near the table.

Never raise at the table!

Unplug the machine from the mains during transport.

MACHINE DESCRIPTION

Due to its perfected design, the machine offers a versa-

tile application for processing wood and plastics in the

workshop. The upper and lower bandwheel is protected

by a ﬁxed guard and an articulated cover. The non-cut-

ting part of the sawbelt above the table top is covered

by a guard ﬁxed to the sawbelt guide, the latter being

protected against inadvertant opening by the ﬁxed guard

of the upper band wheel. The non-cutting part of the saw-

belt under the table top is protected by a ﬁxed cover. The

swivelling range of the table from -5° to +45° allows

versatile cutting possibilities (e.g.)

• Longitudinal cuts

• Cross cuts

• Diagonal cuts

• Curved and irregular cuts

• Cuts for dovetails and tenons

• Onedge cuts of squared beams

Please consult also the working hints in the operating in-

structions.

Assembly

ASSEMBLY TOOLS

1 engineer’s wrench SW 10/13

1 hexagonal head spanner SW 3

1 hexagonal head spanner SW 4

Tabletop and the mounting angles are not mounted for

reasons of packaging technology.

ASSEMBLY OF THE TABLE TOP FIG 1, 2, 3

1 Position the table top (A) over the band saw blade

(B) and put it on the swivelling sheet Fig.1

2 Attach the table with 3 screws M6x16, 3 washers

and 3 hex nuts M6. Fasten the screw slightly by hand

Fig.2

3 Attach the U bracing (C) with 2 countersink screws

M6x16 and knurled nuts (D) at the front of the sawing

table. Fig.3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach SB08 Woodster in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach SB08 Woodster Manual

Product: