Manual Scheppach SB08 Woodster (page 15 of 48) (English, German, French, Italian)

782162

Zoom out

Zoom in

1/48

apposés sur la machine.

• Toutes les consignes de sécurité et tous les avertisse-

ments doivent se trouver sur la machine - intégrale-

ment et parfaitement lisibles.

• Avec les outillages et accessoires fournis, la scie à

ruban est conçue exclusivement pour scier du bois,

une matière similaire au bois, des métaux nonferreux

et de l’acier.

• Sur la version standard, les dimensions maximales des

pièces à usiner ne doivent pas dépasser la taille de

la table.

• Avec des dimensions de pièce plus grandes, nécessi-

tant d’incliner la table, il faut utiliser la rallonge de la

table ou le chevalet (accessoires spéciaux).

• La scie à ruban peut aussi être utilisée pour scier du

métal avec un ruban spécial (accessoire spécial) et en

réglant une vitesse de coupe adaptée. Les alliages de

métaux avec plus de 80% de magnésium ne peuvent

pas être traités en raison du danger de feu.

• Avec des lames spéciales (pièces en option), la scie

à ruban peut être utilisée pour découper des métaux

non ferreux, ou des matériaux plastiques. de risque

d’incindie. Utilisez exclusivement les lames commer-

cialisées par le fabricant.

• En cas d’utilisation dans des pièces fermées, la ma-

chine doit être raccordée à un système d’aspiration.

Pour aspirer les copeaux ou la sciure de bois, utiliser

un système d’aspiration. La vitesse du courant d’air

à l’embout d’aspiration doit être de 20 m/s. Dépres-

sion 860 Pa.

• L`installation d`aspiration se met en route automa-

tiquement avec une temporisation de 23 secondes,

après mise en marche de la machine-outil.

• Lors de la mise hors circuit de la machine, le système

d’aspiration continue de fonctionner 3 à 4 secondes

et il s’arrête ensuite automatiquement. La poussière

résiduelle est aspirée comme il est prescrit dans la

disposition sur les matières dangereuses. Ceci permet

d’économiser du courant et de réduire le bruit, car le

dispositif d’aspiration ne fonctionne que pendant le

fonctionnement de la machine.

• Pour un fonctionnement dans des zones commerciales,

il faut utiliser pour l’aspiration un système répondant

aux prescriptions commerciales.

• Ne pas couper ni retirer les systèmes d’aspiration ou

les dépoussiéreurs pendant la marche la machine.

• La machine ne doit être utilisée que dans un parfait

état technique et que dans le respect des règles de

l’art, des consignes de sécurité et de danger, et ce en

respectant les instructions de service. Eliminer sans

retard (ou faire éliminer) les pannes qui peuvent met-

tre la sécurité en danger.

• Les prescriptions de sécurité, de travail et d’entretien

du fabricant et les dimensions indiquées dans les ﬁ-

ches techniques doivent être respectées.

• Les consignes de prévention contre les accidents et

les autres directives de sécurité reconnues en règle

générale doivent être respectées.

• La machine ne doit être utilisée, entretenue ou réparée

que par des personnes parfaitement familiarisées avec

la machine et avec les dangers possibles. Le fabricant

to the machine.

• See to it that safety instructions and warnings attached

to the machine are always complete and perfectly leg-

ible.

• The bandsaw with the supplied tools and accessories is

designed exclusively for sawing wood, material similar

to wood, and non-ferrous metals and steel.

• The maximum dimension of the workpieces to be proc-

essed may not exceed with the standard design of the

table size. For larger workpiece dimensions which

require tipping of the table top, the table extension

or the dolly (special accessories) must be used. The

band saw can also be used for sawing metal when it

is equipped with a special saw band dolly (special ac-

cessory) and a operated at an adapted cutting speed.

Metal allows with more than 80 % magnesium may not

be processed due to the danger of ﬁres.

• With special saw blades (special accessories) the rib-

bon saw can also be used to saw non-ferrous metal and

plastics. Material alloys containing more than 80%

magnesium must not be processed due to the risk of

ﬁre. Use only the saw blades offered by the manu-

facturer.

• When used in enclosed rooms, the machine must be

connected to a vacuum exhaust unit. Use the dust ex-

tractor to remove matchwood or saw dust. The vacuum

support ﬂow rate must be 20 m/s. Subatmospheric

pressure 860 Pa.

• The vacuum exhaust unit automatically switches on af-

ter a 23 second delay after the machine tool is turned

on. This avoids overloading the circuit fuse.

• After turning off the machine tool, the vacuum exhaust

unit remains on for an additional 23 seconds and is

then automatically switched off. Remaining dust is

thereby removed by vacuum exhaust, as required by

German regulations governing hazardous materials.

This results in savings in electricity consumption and

reduces noise levels, as the vacuum exhaust unit is on

only during machine tool operation.

• A suction device which conforms with commercial reg-

ulations must be used for suction in commercial ar-

eas. Do not switch off or remove suction units or dust

extractors while the work machine is in operation. The

machine must only be used in technically perfect con-

dition in accordance with its designated use and the

instructions set out in the operating manual, and only

by safety-conscious persons who are fully aware of the

risks involved in operating the machine. Any functional

disorders, especially those affecting the safety of the

machine, should therefore be rectiﬁed immediately.

• The safety, work and maintenance instructions of the

manufacturer as well as the technical data given in the

calibrations and dimensions must be adhered to.

• Relevant accident prevention regulations and other,

generally recognized safety-technical rules must also

be adhered to. The machine may only be used, main-

tained, and operated by persons familiar with it and

instructed in its operation and procedures. Arbitrary

alterations to the machine release the manufacturer

from all responsibility for any resulting damages. The

machine may only be used with original accessories

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach SB08 Woodster in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach SB08 Woodster Manual

Product: