781489

Scheppach PRECISA 6.0 Manual

23
Zoom out
Zoom in
Previous page
1/80
Next page
english 23
Sawblade - riving knife
Fig. "L"
1 holding rnandrel
2 left-handed hex. nut
• Take out the left hand table inlay.
• Insert the holding mandrel (1) into the saw spindle via the
bore in the right- hand side of the table. For releasing or
tightening the hex. nut M 20 (2) the saw spindle is locked
with the holding mandrel.
• Note the sawblade running direction.
Riving knife
• Release the screw (3), insert and clamp in the riving knife.
The distance between the sawblade and the riving knife (4)
must amount to no more than 8 mm and must be checked
each time the sawblade is changed and reset as necessary.
The riving knife tip must never be set lower than the height
of the base of the topmost sawtooth. A setting to rnax. 2 rnrn
under the topmost sawtooth tip is ideal.
The riving knife is an irnportant safety device, which guides the
workpiece and prevents the cut pinching and the workpiece
being thrown backwards. Note the riving knife thickness - refer
to the nurnbers starnped on the riving knife. The riving knife
must not be thinner than the sawblade body and not thicker than
its cutting joint width.
Attention! Close the protection cap (5)
Risk of damage!
Suction hose
Fig. "L1"
attach suction hose Ø 50 and affix hose band clip
Suction connection piece
Place the suction connection piece for the dust extractor onto
the back emission tube
Tool holder
Fig. "M"
Place the supplied tools for the Precisa 6.0 within easy reach
in the tool holder.
Fig. "L1"
Fig. "M"
Fig. "L"
3
2
1
3
2
4
5
2mm
3-8mm
3-8mm
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach PRECISA 6.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach PRECISA 6.0 in the language / languages: English, German, Dutch, French, Finnish as an attachment in your email.

The manual is 7.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info