781489

Scheppach PRECISA 6.0 Manual

21
Zoom out
Zoom in
Previous page
1/80
Next page
english 21
Fig. "A"
Fig. "B"
Fig. "F"
Fig. "G"
Mounting
All assembly and retrofitting work may only be performed when the
mains plug has been disconnected.
Your scheppach circular sawbench is not completely assembled for
packaging reasons.
Assembly tools
The following are included in the scope of delivery:
1 open-end spanner 19 mm width across flats
1 open-end spanner 30 mm width across flats
1 allen key 5 mm width across flats
1 allen key 6 mm width across flats
1 allen key 4 mm width across flats
Parallel fence Fig. "A"
Screw the fence section, in-between plate and guiding slide
together. For this purpose, insert the threaded bolts in the
guiding slide.
4 intermediate bushes
4 cheese head screws M 6 x 40
Fig. "B"
Attach the intermediate plate to the fence section.
- Do not tighten -
2 cheese head screws M 6 x 75
2 washers 6
2 wing nuts M 6
Parallel fence adjustment
Fig. "F"
• Open the extender lever on the sliding table (pull upwarts)
and put it condescendingly on the guide tube
For precise adjustment of the parallel fence in relation to the
circular saw blade, release the four cheese head screws (1),
and clamp the guide slide at a distance of approx. 100 mm
from the blade. Place a straight slat of approx. 600 mm length
against the blade. Align the fence parallel with the saw blade
by repeated measurement (X) and readjustment. Retighten the
cheese head screws (1)
Important!
For cutting widths below 120 mm always use a push stick.
Stop rail
Fig. "G"
Position 1:
For working with raised stop bar surface. The displayed cut
width is on the black display scale.
Position 2;
For working with lowered stop bar sur- face.
The displayed cut width is on the blue display scale. (Lower
stop bar surface symbol)
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach PRECISA 6.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach PRECISA 6.0 in the language / languages: English, German, Dutch, French, Finnish as an attachment in your email.

The manual is 7.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info