Manual Scheppach PRECISA 6.0 (page 24 of 80) (English, German, Dutch, French, Finnish)

781489

Zoom out

Zoom in

1/80

24 english

Crosscut 1 mitre gauge

Fig. "N"

Screw the swivelling part and the sliding rail together.

1 washer Ø 6,4

1 lock lever M 6

Mount the stop rail onto the swivelling part

2 oval head screws M 6 x 25

2 wing-nuts M 6

Set the crosscut / mitre gauge as required to the right or left of

the sawblade.

Locking at 0° and 45° is effected with the socket pin and lock

lever.

table length extension

Fig. "O"

Attach table lenght extension to the machine. Bolt the screws

to the machine only by hand.

11 hexagonal screws M8x16

16 washers Ø8

5 hexagonal nut M8

Adjust the table length extension to the saw table ﬂat (with two

wood lathes) and ﬁx all screws.

Fit the hose holder and attach the suction hose Ø 50.

Your Circular saw bench Precisa 6.0 is now fully assembled.

Installing and adjusting

Fig. "P"

Make sure that your scheppach Circular saw bench ts 4020 is

installed so that it is level and stable on a solid surface. Level

out surface uneveness.

To this end at the adjustable feet

• Release the hex. nut (1)

• Carry out the height adjustment

• Tighten up (1) the hex. nut

Fig. "N"

Fig. "P"

Fig. "O"

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach PRECISA 6.0 in the language / languages: English, German, Dutch, French, Finnish as an attachment in your email.

The manual is 7.7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach PRECISA 6.0 Manual

Product: