Manual Scheppach OSM600 (page 20 of 116) (English, German, French, Italian, Polish)

781479

Zoom out

Zoom in

1/116

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

20 | GB

• Check the connection cable of the electric tool reg-

ularly and have it replaced by a recognised special-

ist when damaged.

• Check extension cables regularly and replace them

when damaged.

• Keep the handle dry, clean and free of oil and

grease.

15. Pull the plug out of the outlet

• Never remove loose splinters, chips or jammed

wood pieces from the running saw blade.

• During non-use of the electric tool or prior to main-

tenance and when replacing tools such as saw

blades, bits, milling heads.

• When the saw blade is blocked due to abnormal

feed force during cutting, turn the machine o󰀨 and

disconnect it from power supply. Remove the work

piece and ensure that the saw blade runs free. Turn

the machine on and start new cutting operation

with reduced feed force.

16. Do not leave a tool key inserted

• Before switching on, make sure that keys and ad-

justing tools are removed.

17. Avoid inadvertent starting

• Make sure that the switch is switched o󰀨 when

plugging the plug into an outlet.

18. Use extension cables for outdoors

• Only use approved and appropriately identied ex-

tension cables for use outdoors.

• Only use cable reels in the unrolled state.

19. Remain attentive

• Pay attention to what you are doing. Remain sensi-

ble when working. Do not use the electric tool when

you are distracted.

20. Check the electric tool for potential damage

• Protective devices and other parts must be care-

fully inspected to ensure that they are fault-free and

function as intended prior to continued use of the

electric tool.

• Check whether the moving parts function faultless-

ly and do not jam or whether parts are damaged. All

parts must be correctly mounted and all conditions

must be fullled to ensure fault-free operation of the

electric tool.

• The moving protective hood may not be xed in the

open position.

• Damaged protective devices and parts must be

properly repaired or replaced by a recognised

workshop, insofar as nothing di󰀨erent is specied

in the operating manual.

• Damaged switches must be replaced at a customer

service workshop.

• Do not use any faulty or damaged connection ca-

bles.

• Do not use any electric tool on which the switch

cannot be switched on and o󰀨.

21. Attention!

• The use of other insertion tools and other acces-

sories can entail a risk of injury.

22. Have your electric tool repaired by a qualied

electrician

• This electric tool conforms to the applicable safety

regulations. Repairs may only be performed by an

electrician using original spare parts. Otherwise

accidents can occur.

m WARNING! This electric tool generates an elec-

tromagnetic eld during operation. This eld can im-

pair active or passive medical implants under certain

conditions. In order to prevent the risk of serious or

deadly injuries, we recommend that persons with

medical implants consult with their physician and the

manufacturer of the medical implant prior to operat-

ing the electric tool.

Additional safety rules for the oscillating spindle

grinding machines

WARNING: Do not use your machine until it is com-

pletely assembled and installed according to the in-

structions.

• If you are not familiar with the operation of the

sanding machine, ask the head of the department,

your teacher, or any other qualied person.

• ATTENTION: This machine has only been de-

signed for sanding wood or similar materials. The

sanding of other materials can cause re, injuries,

or damage the product.

• Always wear safety goggles.

• This machine may only be operated indoors.

• IMPORTANT: Mount and use the machine on a

horizontal surface. A non-horizontal surface can

damage the motor.

• If the machine tends to tilt or walk (especially when

sanding long and heavy panels), it must be fas-

tened to a solid surface of su󰀩cient carrying force.

• Firmly hold the workpiece when sanding.

• Do not wear gloves. Do not hold the workpiece with

a cloth during sanding.

• Never sand workpieces too small to be held safely.

• Avoid awkward hand positions where a sudden slip

could cause your hand to touch the sanding belt

or disc.

• When sanding a large piece of material, provide an

additional support at table height.

• Never sand an unsupported workpiece. Secure the

workpiece with the table or the fence. Exceptions

are the sanding of curved workpieces on the out-

side of the sanding disc.

• Always clear the table, fence or sanding belt of

scraps or other objects, before turning the machine

on.

• Do not perform any layout assembly or set-up work

on the table while the sanding machine is in opera-

tion.

• Switch the machine o󰀨 and pull the power plug from

the socket when tting or removing accessories.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach OSM600 in the language / languages: English, German, French, Italian, Polish as an attachment in your email.

The manual is 5.33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach OSM600 Manual

Product: