Manual Scheppach OSM600 (page 19 of 116) (English, German, French, Italian, Polish)

781479

Zoom out

Zoom in

1/116

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 19

4. Intended use

The Oscillating Spindle Grinding is used for sanding all

types of wood, depending on the size of the machine.

The machine meets the currently valid EU machine

directive.

• The manufacturer’s safety, operation and main-

tenance instructions as well as the technical data

given in the calibrations and dimensions must be

adhered to.

• Relevant accident prevention regulations and other

generally recognized safety and technical rules

must also be adhered to.

• The machine may only be used, maintained or re-

paired by trained persons who are familiar with the

machine and have been informed about the dan-

gers. Unauthorized modications of the machine

exclude a liability of the manufacturer for damages

resulting from the modications.

• The machine is intended for use only with original

spare parts and original tools from the producer.

• Any other use is considered to be not intended. The

manufacturer excludes any liability for resulting

damages, the risk is exclusively borne by the user.

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial appli-

cations. Our warranty will be voided if the equipment

is used in commercial, trade or industrial businesses

or for equivalent purposes.

5. General safety information

m ATTENTION! The following basic safety meas-

ures must be observed when using electric tools for

protection against electric shock, and the risk of in-

jury and re. Read all these notices before using the

electric tool and keep the safety instructions for later

reference.

Safe work

1. Keep the work area orderly

• Disorder in the work area can lead to accidents.

2. Take environmental inuences into account

• Do not expose electric tools to rain.

• Do not use electric tools in a damp or wet environ-

ment.

• Make sure that the work area is well-illuminated.

• Do not use electric tools where there is a risk of re

or explosion.

3. Protect yourself from electric shock

• Avoid physical contact with earthed parts (e.g.

pipes, radiators, electric ranges, cooling units).

4. Keep children away

• Do not allow other persons to touch the equipment or

cable, keep them away from your work area.

5. Securely store unused electric tools

• Unused electric tools should be stored in a dry, ele-

vated or closed location out of the reach of children.

6. Do not overload your electric tool

• They work better and more safely in the specied

output range.

7. Use the correct electric tool

• Do not use low-output electric tools for heavy work.

• Do not use the electric tool for purposes for which it

is not intended. For example, do not use handheld

circular saws for the cutting of branches or logs.

• Do not use the electric tool to cut rewood.

8. Wear suitable clothing

• Do not wear wide clothing or jewellery, which can

become entangled in moving parts.

• When working outdoors, anti-slip footwear is rec-

ommended.

• Tie long hair back in a hair net.

9. Use protective equipment

• Wear protective goggles.

• Wear a mask when carrying out dust-creating work.

10. Connect the dust extraction device if you will be

processing wood, materials similar to wood, or

plastics.

• If connections for dust extraction and a collecting

device are present, make sure that they are con-

nected and used properly.

• When processing wood, materials similar to wood,

and plastics. operation in enclosed spaces is only

permitted with the use of a suitable extraction sys-

tem.

11. Do not use the mains lead for purposes for which

it was not intended.

• Do not use the mains lead to pull the plug out of the

mains socket. Protect the mains lead from heat, oil

and sharp edges

12. Secure the workpiece

• Use the clamping devices or a vice to hold the

workpiece in place. In this manner, it is held more

securely than with your hand.

• An additional support is necessary for long work-

pieces (table, trestle, etc.) in order to prevent the

machine from tipping over.

• Always press the workpiece rmly against the work-

ing plate and stop in order to prevent bouncing and

twisting of the workpiece.

13. Avoid abnormal posture

• Make sure that you have secure footing and always

maintain your balance.

• Avoid awkward hand positions in which a sudden

slip could cause one or both hands to come into

contact with the saw blade.

14. Take care of your tools

• Keep cutting tools sharp and clean in order to be

able to work better and more safely.

• Follow the instructions for lubrication and for tool

replacement.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach OSM600 in the language / languages: English, German, French, Italian, Polish as an attachment in your email.

The manual is 5.33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach OSM600 Manual

Product: