Manual Scheppach Muli 4000 (page 26 of 60) (English, German, French, Italian)

781929

Zoom out

Zoom in

1/60

the main switch in the event of an emergen-

cy.

Never clean electrical equipment with water

or similar liquids.

Information for work on hydraulic

equipment:

All work on the hydraulic equipment of the

machine may only be performed by qualified

personnel trained for this purpose as a basic

rule.

Before working, de-pressurise all hydraulic

systems / system parts.

Make sure that suitable collection containers

are available for all materials harmful to

groundwater (oils, coolant, etc.) before

beginning work.

Duties before finishing work

After completion of the service tasks and

prior to starting the machine, the following

points must be observed:

• Fill in the test reports, task reports, etc.

• Re-check all previously unscrewed

screw connections for firm seating.

• Check whether all previous removed

protective devices, covers, container

lids, etc. are properly re-mounted.

• Make sure that all tools, equipment

and materials which were used have

been removed from the work area.

• Clean the work area and remove any

spilled liquids and similar materials.

• Make sure that all the machine's safety

equipment functions properly again.

• Test the function of the safety equip-

ment. Do not release the machine for

use if the safety equipment does not

function properly.

• Mount and secure the disassembled

protective devices.

• Remove all tools, foreign parts and

operating materials left lying around.

• Perform a test run with a functional

check of the serviced components.

• Secure the machine against unauthor-

ised start-up if you have not completed

the work.

• Handling of open flames and smoking

are prohibited.

Maintenance

Cleaning

The conveyor belt should be cleaned thor-

oughly after each use. This will increase the

service life of the machine considerably.

Inspecting the rubber belt

After each use the rubber mats must be

inspected for damage and replaced as neces-

sary.

Check the cable for the cable winch

The cable must be inspected before and after

each use for damage. It may not have any

kinked or crushed areas. Similarly, individu-

al strands may not be broken.

If any damage is present on the cable, it must

be immediately replaced.

Inspect all cable rolls for signs of wear.

Tensioning the conveyor belt

The conveyor belt must be re-tightened

regularly. For this purpose, first loosen the 4

screws (10). Then the upper deflection pul-

ley can be shifted over the two threaded rods

(11).

In the process, always make sure that the re-

tightening takes place to an equal extent on

both sides. Otherwise the conveyor belt

would not longer run in the centre.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Muli 4000 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach Muli 4000 Manual

Product: