Manual Scheppach MS216A Kity (page 24 of 44) (English, German, French)

782498

Zoom out

Zoom in

1/44

24 GB

• Repairs of the laser may only be carried out by the

laser manufacturer or an authorised representative.

Safety instructions for handling batteries

1 Always make sure that the batteries are inserted

with the correct polarity (+ and –), as indicated on

the battery.

2 Do not short-circuit batteries.

3 Do not charge non-rechargeable batteries.

4 Do not overcharge batteries!

5 Do not mix old and new batteries or batteries of

different types or manufacturers! Replace an entire

set of batteries at the same time.

6 Immediately remove used batteries from the device

and dispose of them properly!

7 Do not allow batteries to heat up!

8 Do not weld or solder directly on batteries!

9 Do not dismantle batteries!

10 Do not allow batteries to deform!

11 Do not throw batteries into re!

12 Keep batteries out of the reach of children.

13 Do not allow children to replace batteries without

supervision!

14 Do not keep batteries near re, ovens or other

sources of heat. Do not use batteries in direct sun-

light or store them in vehicles in hot weather.

15 Keep unused batteries in the original packaging and

keep them away from metal objects. Do not mix

unpacked batteries or toss them together! This can

lead to a short-circuit of the battery and thus dam-

age, burns or even the risk of re.

16 Remove batteries from the equipment when it will

not be used for an extended period of time, unless

it is for emergencies!

17 NEVER handle batteries that have leaked without

appropriate protection. If the leaked uid comes into

contact with your skin, the skin in this area should be

rinsed off under running water immediately. Always

prevent the uid from coming into contact with the

eyes and mouth. In the event of contact, please seek

immediate medical attention.

18 Clean the battery contacts and corresponding con-

tacts in the device prior to inserting the batteries:

6. Technical data

AC motor 230 - 240 V~ 50Hz

Power 1700 Watt

Operating mode S6 20% 5 Min

Idle speed n03800 / 5000 min -1

Carbide saw blade

ø 216 x ø 30 x 1,26 mm ø 216 x ø 30 x 2,8 mm

Number of teeth 40

Swivel range -45° / 0°/ +45°

Mitre cut 0° bis 45° nach left

Saw width at 90° 305 x 65 mm

Saw width at 45° 215 x 65 mm

Saw width at 2 x 45°

(double mitre cut) 215 x 36 mm

Protection class II

Weight 12,2 kg

Laser class 2

Wavelength of laser 650 nm

Laser output ≤ 1 mW

Laser module power

supply

3 x AG13

button cell

* S6, continuous operation periodic duty.

Identical duty cycles with a period at load followed

by a period at no load. Running time 5 minutes; du-

ty cycle is 20% of the running time.

The work piece must have a minimum height of 3mm

and a minimum width of 10 mm.

Make sure that the workpiece is always secured with

the clamping device.

Noise and vibration

Total vibration values determined in accordance with

EN 61029.

sound pressure level LpA 95 dB(A)

uncertainty KpA 3 dB

sound power level LWA 108 dB(A)

uncertainty KWA 3 dB

Wear hearing protection.

The effects of noise can cause a loss of hearing. Total

vibration values (vector sum - three directions) deter-

mined in accordance with EN 61029.

Vibration emission value ah2,50 m/s²

uncertainty K 1,5 m/s²

- The specied vibration value was established in ac-

cordance with a standardized testing method. It may

change according to how the electric equipment is

used and may exceed the specied value in exceptio-

nal circumstances;

- The specied vibration value can be used to compare

the equipment with other electric power tools.

- The specied vibration value can be used for initial

assessment of a harmful effect.

Warning:

• The vibration emission value can vary from the speci-

ed value during the actual use of the electric tool,

depending on the type and the manner in which the

electric tool is used;

• Try to minimise stress from vibrations as low as possi-

ble. Some examples of means for reducing the vibra-

tion stress are wearing gloves while using the tool and

limiting work time. In the process all parts of the operat-

ing cycle must be taken into account (such as times in

which the electric tool is switched off or time in which it

is switched on, but is not running under a load).

Residual risks

The machine has been built according to the state of

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach MS216A Kity in the language / languages: English, German, French as an attachment in your email.

The manual is 3.68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach MS216A Kity Manual

Product: