Manual Scheppach MS216A Kity (page 23 of 44) (English, German, French)

782498

Zoom out

Zoom in

1/44

23GB

of material to be processed, the signicance of

local separation (collection or source) and the

correct setting of the hood/guide plates/guides.

–Do not use saw blades made of high-speed alloy

steel (HSS steel).

2 Maintenance and repair

–Pull out the mains plug for any adjustment or

repair tasks.

–The generation of noise is inuenced by various

factors, including the characteristics of saw

blades, condition of saw blade and electric

tool. Use saw blades which were designed for

reduced noise development, insofar as possible.

Maintain the electric tool and tool attachments

regularly and if necessary, initiate repairs in

order to reduce noise.

–Report faults on the electric tool, protective

devices or the tool attachment to the person

responsible for safety as soon as they are dis-

covered.

3 Safe work

–Only use saw blades for which the maximum

permissible speed is not lower than the maxi-

mum spindle speed of table saws and which are

suitable for the material to be cut.

–Make sure that the saw blade does not touch

the rotary table in any position by pulling out the

mains plug and rotating the saw blade by hand

in the 45° and 90° position. If necessary, read-

just the saw head.

–When transporting the electric tool, only use

the transport devices. Never use the protective

devices for handling or transport.

–Make sure that the lower part of the saw blade is

covered during transport, e.g. by the protective

device.

–Be sure to only use spacers and spindle rings

specied by the manufacturer as suitable for the

intended purpose.

–Do not use the saw to cut materials other than

those which are specied.

–The oor around the machine must be level,

clean and free of loose particles, such as chips

and cutting residues.

–Do not remove any cutting residues or other

parts of workpieces from the cutting zone while

the machine is running and the saw unit is not

at rest.

–Make sure before each cut that the machine is

always secured on a workbench or a table if at

all possible.

–Make sure that the saw will only be used with

guards in good working order and properly main-

tained, and in position.

–Support long workpieces (e.g. with a roller table)

to prevent them sagging at the end of a cut.

Warning! This electric tool generates an electromag-

netic eld during operation. This eld can impair active

or passive medical implants under certain conditions. In

order to prevent the risk of serious or deadly injuries, we

recommend that persons with medical implants consult

with their physician and the manufacturer of the medical

implant prior to operating the electric tool.

SAFETY INSTRUCTIONS FOR THE HANDLING OF

SAW BLADES

1 Only use tools if you have mastered their use.

2 Observe the maximum speed. The maximum

speed specied on the insertion tool may not be

exceeded. If specied, observe the speed range.

3 Observe the motor / saw blade direction of rota-

tion.

4 Do not use any insertion tools with cracks. Sort out

cracked insertion tools. Repairs are not permitted.

5 Clean grease, oil and water off of the clamping

surfaces.

6 Do not use any loose reducing rings or bushes for

the reducing of holes on saw blades.

7 Make sure that reducer rings for securing the tool

have the same diameter and have at least 1/3 of

the cutting diameter.

8 Make sure that reducer rings are parallel to each

other.

9 Handle insertion tool with caution. They are ideally

stored in the originally package or special contain-

ers. Wear protective gloves in order to improve

grip and to further reduce the risk of injury.

10 Prior to the use of insertion tools, make sure that

all protective devices are properly fastened.

11 Prior to use, make sure that the insertion tool

meets the technical requirements of this electric

tool and is properly fastened.

12 Only use the supplied saw blade for sawing opera-

tions in wood, materials similar to wood, plastics

and non-ferrous metals (except for magnesium and

alloys containing magnesium).

Attention: Laser radiation

Do not stare into the beam

Class 2 laser

Protect yourself and you environment from acci-

dents using suitable precautionary measures!

• Do not look directly into the laser beam with unpro-

tected eyes.

• Never look into the path of the beam.

• Never point the laser beam towards reecting sur-

faces and persons or animals. Even a laser beam

with a low output can cause damage to the eyes.

• Caution - methods other than those specied here

can result in dangerous radiation exposure.

• Never open the laser module. Unexpected exposure

to the beam can occur.

• If the mitre saw is not used for an extended period

of time, the batteries should be removed.

• The laser may not be replaced with a different type

of laser.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach MS216A Kity in the language / languages: English, German, French as an attachment in your email.

The manual is 3.68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach MS216A Kity Manual

Product: