Manual Scheppach LBH2600P (page 23 of 60) (English, German, Dutch, French)

781388

Zoom out

Zoom in

1/60

23GB

6. Technical data

LBH2600P

Technical data

Dimension LxWxH mm 1050x250x350

Air speed max. km/h 260

air volume min./max. m3/min -

dust bag capacity l 50

Power unit

Displacement cm3 25,4

Max. engine output kW 0,7

Idle speed min-1 3500 ± 300

Fuel tank capicity cm3 650

Engine type 2-stroke

engine, air-

cooled

Blower weight kg 4,7

Vacuum weight kg 5,6

Total weight kg 6,4

Subject to technical changes!

Information concerning noise emission measured ac-

cording to relevant standards:

Sound pressure LpA = 97,0 dB(A)

Sound power LWA = 108,4 dB(A)

Uncertainty KPA = 3 dB(A)

Wear ear-mu󰀨s.

The impact of noise can cause damage to hearing.

Vibration

Lower handle Ahv = 15,1 m/s2

Upper handle Ahv = 11,92 m/s2

Uncertainty KPA = 1.5 m/s2

Reduce noise generation and vibration to a minimum!

• Use only equipment that is in perfect condition.

• Maintain and clean the equipment regularly.

• Adopt your way of working to the equipment.

• Do not overload the equipment.

• Have the equipment checked if necessary.

• Switch o󰀨 the equipment when not in use.

• Wear gloves.

In these operating instructions we have marked

the places that have to do with your safety with

this sign: m

7. Attachment and operation

ATTENTION! Before working on the device - clean-

ing, inspection, maintenance or other work - always

turn o󰀨 the device.

ATTENTION!

Remove transport protection ring (23) Fig 1

Assembly blower(Fig 7-9)

m Warning: The blower must not be used or

switched on until it has been fully assembled.

• Remove the screw (K) and its washers (L).

• Align the rst blower tube(4) compartment with

the protrusion of the air outlet, push the tube and

turn it 90° clockwise, in order to permanently x

it in place.

• Fix the tube (4) to the air outlet using the screw (K)

and its washers (L).

• Align the second blower tube(5) compartment with

the protrusion (P) of the rst tube, push the tube

and turn it 90° clockwise, in order to permanently

x it in place.

m Warning! Use only original manufacturer‘s re-

placement parts, accessories and attachments. Fail-

ure to do so can cause poor performance, possible

injury and may void your warranty. Never use the

machine without the guard assembled!

Assembly vacuum collector (Fig 10 - 14 )

• Warning: The vacuum collector must not be

used or switched on until it has been fully as-

sembled.

• Remove the screw (1) and the washer (2).

• Align the tube (18) with the projection of the Air

outlet, then slide the Pipe over the air outlet and

turn it over 90 ° counterclockwise to make it per-

manent to x.

• Insert the pipe end (18) into the catch bag (17) and

close the opening with the supplied Velcro tape.

• The pipe (18) with the screw (K) and the washers

Secure (L) to the air outlet.

• Release the star grip (21) and remove the protec-

tive grille (22) to open.

• Align the suction pipe (19) with the projection from

the inlet, slide the pipe in the direction of the pro-

jection and turn it 90 ° clockwise to x it perma-

nently.

• Align the second suction pipe (20) with the Slide

out the projection of the rst tube (19)You put the

two tubes together and turn them Turn it 90 °

clockwise to make it permanent x.

• The engine can not start if you do not assemble

the vacuum tube when using as a vacuum.

Operation

Before starting

Each time before use, check the following:

• That there are no leaks in the fuel system.

• That the equipment is in perfect condition and that

the safety devices and cutting devices are complete.

• That all screws are securely fastened.

• That all moving parts move smoothly.

• That the protective ap (E) is closed and that all

security switches (F) are activated (g. 15).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach LBH2600P in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach LBH2600P Manual

Product: