781388
22
Zoom out
Zoom in
Previous page
1/60
Next page
22 GB
Workplace safety
Keep your work area clean and well illuminated.
Untidy or unlit work areas can result in accidents.
Do not operate the device in an environment where
there is a risk of explosions and where there are
inammable liquids, gases or dust. Device produce
sparks which could set the dust or vapours alight.
Keep the device out of the reach of children and
other persons. If there is a distraction, you may
lose control of the appliance.
Safety of persons
Be careful, watch what you are doing and use an
device sensibly. Do not use the tool if you are tired
or under the inuence of drugs, alcohol or medica-
tion. A moment of inattention when using the device
can result in serious injuries.
Wear personal protection equipment and always
wear safety goggles. Wearing personal protection
(such as dust masks, non-slip safety shoes, safety
helmet or ear protection, depending upon the type
and use of the device) reduces the risk of injury.
Make sure that the appliance cannot start up ac-
cidentally. If yournger is on the switch whilst car-
rying the device this can lead to accidents.
Remove keys and wrenches before switching on
the device. A tool or key which comes into contact
with rotating parts of the appliance can lead to
injuries.
Avoid abnormal working postures. Make sure you
stand squarely and keep your balance at all times.
In this way, you can control the device better in
unexpected circumstances.
Wear suitable work clothes. Do not wear loose
clothing or jewellery. Keep hair, clothes and gloves
away from moving parts. Loose clothing, jewellery
or long hair can get trapped in moving parts.
Usage and treatment of the device
Do not overload the appliance. Use the correct
tool for your work. You will be able to work bet-
ter and more safely within the given performance
boundaries.
Do not use an device with a defective switch. An
device tool that cannot be switched on or o󰀨 is
dangerous and must be repaired.
Keep unused device out of the reach of children.
Do not allow people who are not familiar with the
appliance or who have not read these instructions
to use the appliance. Device are dangerous if they
are used by inexperienced people.
Clean your device carefully. Check whether moving
parts are functioning properly and not jamming,
whether parts are broken or damaged enough that
the functioning of this device is a󰀨ected. Have dam-
aged parts repaired before using the appliance.
Many accidents are caused by badly maintained
device.
Make sure to use device, accessories, attach-
ments, etc. in accordance with these instructions.
Take the conditions in your work area and the job
in hand into account. Using device for any purpose
other than the one for which they are intended can
lead to dangerous situations.
Safe handling with fuels
Fuels and fuel vapours are inammable and may
cause serious injury on the skin or when inhaled.
Therefore be careful and provide su󰀩cient ventilation
when handling with fuels.
Stop the engine and allow the device to cool down
before fuelling it.
Do not smoke and avoid open ames when fuel-
ling. (g. 2)
Wear gloves when fuelling.
Do not fuel in closed rooms. (Danger of explosion)
Avoid spilling of fuel or oil. Clean the hedge trim-
mer immediately when you have spilled fuel or oil.
Change your clothes immediately when you have
spilled fuel or oil on them.
Make sure that no fuel can come into the soil.
Carefully close the tank cap after fuelling and
check that it does not get loose during operation.
Check that there is no leakage on the tank cap
and fuel lines. If there are leaks this device may
not be started.
Only transport and store fuels in containers ap-
proved and identied for this.
Keep children away from fuels.
Do not handle and store fuels close to combustible
and highly inammable materials as well as sparks
and open ames.
Go away at least three metres from the fuelling
place to start the device.
To reduce the re risk keep the motor and silencer
free from cutting remainders, leaves and lubricants.
Keep handles dry, clean and free of fuel mixture.
Do not refuel a running engine or an engine that
is hot.
Residual risks
Even if used properly, residual risks can exist even if
the relevant safety regulations are complied with due
to the design determined by the intended purpose.
Observing these instructions, and taking proper care,
will reduce the risk of personal injury or damage to
the equipment.
Injury by catapulted parts.
Breaking or catapulting of knife pieces.
Carbon monoxide poisoning when using the device
in closed or poorly ventilated rooms.
Burning when touching hot parts.
Impairment of hearing when working on the ma-
chine for longer periods of time without ear pro-
tection.
In addition, in spite of all the precautionary measures
taken, non-obvious residual risks can still exist. Re-
sidual risks can be minimised if the “Safety informa-
tion” and the “Intended usage” as well as the whole
of the operating instructions are observed.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach LBH2600P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach LBH2600P in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info