Manual Scheppach KZS1500 Primaster (page 32 of 52) (English, German, French)

782502

Zoom out

Zoom in

1/52

32 | GB

14. Troubleshooting

Fault Possible cause Remedy

Motor does not work Motor, cable or plug defective, fuses burnt Arrange for inspection of the machine by a spe-

cialist. Never repair the motor yourself. Danger!

Check fuses and replace as necessary

The motor starts up

slowly and does not

reach operating speed.

Voltage too low, coils damaged, capacitor

burnt

Contact the utility provider to check the voltage.

Arrange for inspection of the motor by a special-

ist. Arrange for replacement of the capacitor by a

specialist

Motor makes exces-

sive noise

Coils damaged, motor defective Arrange for inspection of the motor by a special-

ist

The motor does not

reach its full power.

Circuits in the network are overloaded

(lamps, other motors, etc.)

Do not use any other equipment or motors on the

same circuit

Motor overheats

easily.

Overloading of the motor, insu󰀩cient cool-

ing of the motor

Avoid overloading the motor while cutting,

remove dust from the motor in order to ensure

optimal cooling of the motor

Reduced cutting power

when sawing

Saw blade too small (ground too much) Readjust end stop of the saw unit

Saw cut is rough or

wavy

Saw blade dull, tooth shape not appropriate

for the material thickness

Resharpen saw blade and/or use suitable saw

blade

Workpiece pulls away

and/or splinters

Excessive cutting pressure and/or saw

blade not suitable for use

Insert suitable saw blade

Old devices must not be disposed of with house-

hold waste!

This symbol indicates that this product must

not be disposed of together with domestic

waste in compliance with the Directive

(2012/19/EU) pertaining to waste electrical

and electronic equipment (WEEE). This product must

be disposed of at a designated collection point. This

can occur, for example, by handing it in at an author-

ised collecting point for the recycling of waste elec-

trical and electronic equipment. Improper handling

of waste equipment may have negative consequenc-

es for the environment and human health due to po-

tentially hazardous substances that are often con-

tained in electrical and electronic equipment. By

properly disposing of this product, you

are also contributing to the e󰀨ective use of natu-

ral resources. You can obtain information on collec-

tion points for waste equipment from your municipal

administration, public waste disposal authority, an

authorised body for the disposal of waste electri-

cal and electronic equipment or your waste disposal

company.

Batteries and rechargeable batteries do not be-

long in the household waste!

As the consumer you are required by law to

bring all batteries and rechargeable batteries,

regardless whether they contain harmful sub-

stances* or not, to a collection point run by the local

authority or to a retailer, so that they can be disposed

of in an environmentally friendly manner.

*labelled with: Cd = cadmium, Hg = mercury, Pb =

lead

• Remove the batteries from the laser before dis-

posing of the sliding crosscut mitre saw and the

batteries.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach KZS1500 Primaster in the language / languages: English, German, French as an attachment in your email.

The manual is 5.19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach KZS1500 Primaster Manual

Product: