Manual Scheppach KZS1500 Primaster (page 31 of 52) (English, German, French)

782502

Zoom out

Zoom in

1/52

GB | 31

• Places where the connection cables have been cut

due to being driven over.

• Insulation damage due to being ripped out of the

wall outlet.

• Cracks due to the insulation ageing.

Such damaged electrical connection cables must

not be used and are life-threatening due to the in-

sulation damage.

Check the electrical connection cables for dam-

age regularly. Make sure that the connection cable

does not hang on the power network during the

inspection.

Electrical connection cables must comply with the

applicable VDE and DIN provisions. Only use con-

nection cables with the marking „H05VV-F“.

The printing of the type designation on the connec-

tion cable is mandatory.

AC motor

• The mains voltage must be 230 V~.

• Extension cables up to 25 m long must have a

cross-section of 1.5 mm2.

Connections and repairs of electrical equipment

may only be carried out by an electrician.

Please provide the following information in the

event of any enquiries:

• Type of current for the motor

• Machine data - type plate

13. Disposal and recycling

The equipment is supplied in packaging to prevent

it from being damaged in transit. The raw materials

in this packaging can be reused or recycled. Never

place batteries in your household refuse, in re or

in water. Batteries should be collected, recycled or

disposed of by environment-friendly means. The

equipment and its accessories are made of various

types of material, such as metal and plastic. De-

fective components must be disposed of as special

waste. Ask your dealer or your local council.

Service information

Please note that the following parts of this product

are subject to normal or natural wear and that the fol-

lowing parts are therefore also required for use as

consumables.

Wear parts*: Carbon brush, saw blade, battery, table

liners, sawdust bag, V-belts

* Not necessarily included in the scope of delivery!

11. Storage

Store the device and its accessories in a dark, dry

and frost-proof place that is inaccessible to children.

The optimum storage temperature is between 5 and

30˚ C.

Store the electrical tool in its original packaging.

Cover the electrical tool in order to protect it from

dust and moisture.

Store the operating manual with the electrical tool.

12. Electrical connection

The electrical motor installed is connected and

ready for operation. The connection complies

with the applicable VDE and DIN provisions.

The customer‘s mains connection as well as

the extension cable used must also comply

with these regulations.

• The product meets the requirements of EN 61000-

3-11 and is subject to special connection conditions.

This means that use of the product at any freely se-

lectable connection point is not allowed.

• Given unfavourable conditions in the power supply

the product can cause the voltage to uctuate tem-

porarily.

• The product is exclusively intended for use at con-

nection points that have a continuous current-car-

rying capacity of at least 100 A per phase.

• As the user, you are required to ensure, in consulta-

tion with your electric power company if necessary,

that the connection point at which you wish to oper-

ate the product meets the specied requirements.

Important information

In the event of an overloading the motor will switch

itself o󰀨. After a cool-down period (time varies) the

motor can be switched back on again.

Damaged electrical connection cable

The insulation on electrical connection cables is

often damaged.

This may have the following causes:

• Passage points, where connection cables are

passed through windows or doors.

• Kinks where the connection cable has been im-

properly fastened or routed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach KZS1500 Primaster in the language / languages: English, German, French as an attachment in your email.

The manual is 5.19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach KZS1500 Primaster Manual

Product: