Manual Scheppach KP-210 Bamato (page 23 of 48) (English, German, French)

782508

Zoom out

Zoom in

1/48

AMAT

Bavarian Machine Tools

18 Use extension cables for outdoors

–Only use approved and appropriately identied

extension cables for use outdoors.

–Only use cable reels in the unrolled state.

Remain attentive

–Pay attention to what you are doing. Remain

sensible when working. Do not use the electric

tool when you are distracted.

19 Check the electric tool for potential damage

–Protective devices and other parts must be

carefully inspected to ensure that they are fault-

free and function as intended prior to continued

use of the electric tool.

–Check whether the moving parts function fault-

lessly and do not jam or whether parts are dam-

aged. All parts must be correctly mounted and

all conditions must be fullled to ensure fault-

free operation of the electric tool.

–The moving protective hood may not be xed in

the open position.

–Damaged protective devices and parts must be

properly repaired or replaced by a recognised

workshop, insofar as nothing different is speci-

ed in the operating manual.

–Damaged switches must be replaced at a cus-

tomer service workshop.

–Do not use any faulty or damaged connection

cables.

–Do not use any electric tool on which the switch

cannot be switched on and off.

20 ATTENTION!

–Exercise elevated caution for double mitre cuts.

21 ATTENTION!

–The use of other insertion tools and other ac-

cessories can entail a risk of injury.

22 Have your electric tool repaired by a qualied

electrician

–This electric tool conforms to the applicable

safety regulations. Repairs may only be per-

formed by an electrician using original spare

parts. Otherwise accidents can occur.

ADDITIONAL SAFETY INSTRUCTIONS

1 Safety precautions

–Warning! Do not use damaged or deformed saw

blades.

–Replace a worn table insert.

–Only use saw blades recommended by the

manufacturer which conform to EN 847-1.

–Make sure that a suitable saw blade for the ma-

terial to be cut is selected.

–Wear suitable personal protective equipment.

This includes:

–Hearing protection to avoid the risk of becom-

ing hearing impaired,

–Respiratory protection to avoid the risk of

inhaling harmful dust,

–When working outdoors, anti-slip footwear is

recommended.

–Tie long hair back in a hair net.

9 Use protective equipment

–Wear protective goggles.

–Wear a mask when carrying out dust-creating work.

10 Connect the dust extraction device

–If connections for dust extraction and a collect-

ing device are present, make sure that they are

connected and used properly.

–Operation in enclosed areas is only permitted

with a suitable extraction system.

11 Do not use the cable for purposes for which it is

not intended

–Do not use the cable to pull the plug out of the

outlet. Protect the cable from heat, oil and sharp

edges.

12 Secure the workpiece

–Use the clamping devices or a vice to hold the

workpiece in place. In this manner, it is held

more securely than with your hand.

–An additional support is necessary for long

workpieces (table, trestle, etc.) in order to pre-

vent the machine from tipping over.

–Always press the workpiece rmly against

the working plate and stop in order to prevent

bouncing and twisting of the workpiece.

13 Avoid abnormal posture

–Make sure that you have secure footing and

always maintain your balance.

–Avoid awkward hand positions in which a sud-

den slip could cause one or both hands to come

into contact with the saw blade.

14 Take care of your tools

–Keep cutting tools sharp and clean in order to

be able to work better and more safely.

–Follow the instructions for lubrication and for

tool replacement.

–Check the connection cable of the electric tool

regularly and have it replaced by a recognised

specialist when damaged.

–Check extension cables regularly and replace

them when damaged.

–Keep the handle dry, clean and free of oil and

grease.

15 Pull the plug out of the outlet

–Never remove loose splinters, chips or jammed

wood pieces from the running saw blade.

–During non-use of the electric tool or prior to

maintenance and when replacing tools such as

saw blades, bits, milling heads.

16 Do not leave a tool key inserted

–Before switching on, make sure that keys and

adjusting tools are removed.

17 Avoid inadvertent starting

–Make sure that the switch is switched off when

plugging the plug into an outlet.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach KP-210 Bamato in the language / languages: English, German, French as an attachment in your email.

The manual is 5.4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach KP-210 Bamato Manual

Product: