Manual Scheppach KP-210 Bamato (page 24 of 48) (English, German, French)

782508

Zoom out

Zoom in

1/48

24 GB

AMATO

Bavarian Machine Tools

Instructions for proper and safe sawing:

a) Clamp the workpiece always at the saw table

rmly. Therefore please use the supplied clamp-

ing device.

b) Make sure that the machine is secured before

each sawing;

c) If necessary attach the ma-

chine to a workbench or the like.

Fasten the machine to the workbench, using the

holes at the xed saw table.

d) Support long workpieces (e.g. with a roller ta-

ble) to prevent them sagging at the end of a cut.

e) Make sure that the saw blade does not

touch the rotary table in any position by pull-

ing out the mains plug and rotating the

saw blade by hand in the 45° and 90° posi-

tion. If necessary, readjust the saw head.

Warning! This electric tool generates an electro-

magnetic eld during operation. This eld can impair

active or passive medical implants under certain con-

ditions. In order to prevent the risk of serious or dead-

ly injuries, we recommend that persons with medical

implants consult with their physician and the manu-

facturer of the medical implant prior to operating the

electric tool.

SAFETY INSTRUCTIONS FOR THE HANDLING OF

SAW BLADES

1 Only use insertion tools if you have mastered their use.

2 Observe the maximum speed. The maximum

speed specied on the insertion tool may not be

exceeded. If specied, observe the speed range.

3 Observe the motor / saw blade direction of rotation.

4 Do not use any insertion tools with cracks. Sort out

cracked insertion tools. Repairs are not permitted.

5 Clean grease, oil and water off of the clamping

surfaces.

6 Do not use any loose reducing rings or bushes for

the reducing of holes on saw blades.

7 Make sure that xed reducer rings for securing the

insertion tool have the same diameter and have

at least 1/3 of the cutting diameter.

8 Make sure that xed reducer rings are parallel to

each other.

9 Handle insertion tool with caution. They are ideally

stored in the originally package or special contain-

ers. Wear protective gloves in order to improve

grip and to further reduce the risk of injury.

10 Prior to the use of insertion tools, make sure that

all protective devices are properly fastened.

11 Prior to use, make sure that the insertion tool

meets the technical requirements of this electric

tool and is properly fastened.

12 Only use the supplied saw blade for cutting wood,

never for the processing of metals.

–Wear gloves when handling saw blades and

rough materials. Carry saw blades in a con-

tainer whenever practical.

–Wear goggles. Sparks generated during work

or splinters, chippings and dust coming from

the device can lead to loss of eyesight.

–Connect a dust collecting device to the electric

tool when sawing wood. The emission of dust

is inuenced, among other things, by the type

of material to be processed, the signicance of

local separation (collection or source) and the

correct setting of the hood/guide plates/guides.

–Do not use saw blades made of high-speed alloy

steel (HSS steel).

2 Maintenance and repair

–Pull out the mains plug for any adjustment or

repair tasks.

–The generation of noise is inuenced by vari-

ous factors, including the characteristics of saw

blades, condition of saw blade and electric tool.

Use saw blades which were designed for re-

duced noise development, insofar as possible.

Maintain the electric tool and tool attachments

regularly and if necessary, initiate repairs in or-

der to reduce noise.

–Report faults on the electric tool, protective de-

vices or the tool attachment to the person respon-

sible for safety as soon as they are discovered.

3 Safe work

- Make sure that a suitable saw blade for the ma-

terial to be cut is selected.

- Never use the machine to cut other materials as

specied.

- To transport the machine follow the procedure

of point 9.

When transporting the electric tool, only use the

transport devices. Never use the protective de-

vices for handling or transport.

- Operate the machine only if the protective de-

vices are functional, in good condition and in

the correct position.

- The oor around the machine must be level,

clean and free of loose particles, such as chips

and cutting residues.

- Only use saw blades for which the maximum

permissible speed is not lower than the maxi-

mum spindle speed of the machine and which

are suitable for the material to be cut.

- Be sure to only use spacers and spindle rings

specied by the manufacturer as suitable for the

intended purpose.

- Attention! Do not replace

the laser by a different type.

Repairs may only be carried out by the manu-

facturer or an authorized representative.

- Do not remove any cutting residues or other parts

of workpieces from the cutting zone while the ma-

chine is running and the saw unit is not at rest.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach KP-210 Bamato in the language / languages: English, German, French as an attachment in your email.

The manual is 5.4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach KP-210 Bamato Manual

Product: