Manual Scheppach KP-210 Bamato (page 21 of 48) (English, German, French)

782508

Zoom out

Zoom in

1/48

AMAT

Bavarian Machine Tools

2. Layout (Fig. 1-21)

1. Handle

2. ON/OFF switch

3. Release lever

4. Machine head

5. Movable blade guard

6. Saw blade

7. Clamping device

8. Workpiece support

9. Locking screw for workpiece support

10. Table insert

11. Handle

12. Pointer

13. Scale

14. Turntable

15. Fixed saw table

16. Stop rail

16a. Moveable stop rail

16b. Set screw

17. Sawdust bag

18. Scale

19. Pointer

20. Locking screw for drag guide

21. Drag guide

22. Locking screw

23. Fastening bolt

24. screw for cutting depth limiter

25. Stop for cutting depth limiter

26. Fastening bolt for turn table

27. Adjustment screw (90°)

28. Adjustment screw (45°)

29. Flange bolt

30. Outer ange

31. Saw shaft lock

32. Inner ange

33. Laser

34. ON/OFF switch for laser

35. Battery compartment

36. Battery compartment cover

37. Guide bar

a) 90° stop angle (not supplied)

b) 45° stop angle (not supplied)

c) spring

d) Allen key, 6 mm

e) Allen key, 3 mm

3. Scope of delivery

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the

packaging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for trans-

port damage.

1. Introduction

MANUFACTURER:

Markmüller Maschinen GmbH

Gewerbepark 10

94544 Hofkirchen

DEAR CUSTOMER,

We hope your new tool brings you much enjoyment

and success.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs

due to the non-compliance of the electric regu-

lations and VDE regulations 0100, DIN 57113 /

VDE0113.

WE RECOMMEND:

Read through the complete text in the operating in-

structions before installing and commissioning the

device. The operating instructions are intended to

help the user to become familiar with the machine

and take advantage of its application possibilities in

accordance with the recommendations. The operat-

ing instructions contain important information on how

to operate the machine safely, professionally and

economically, how to avoid danger, costly repairs, re-

duce downtimes and how to increase reliability and

service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regula-

tions that apply for the operation of the machine in

your country. Keep the operating instructions pack-

age with the machine at all times and store it in a

plastic cover to protect it from dirt and moisture. Read

the instruction manual each time before operating the

machine and carefully follow its information. The ma-

chine can only be operated by persons who were in-

structed concerning the operation of the machine and

who are informed about the associated dangers. The

minimum age requirement must be complied with.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach KP-210 Bamato in the language / languages: English, German, French as an attachment in your email.

The manual is 5.4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach KP-210 Bamato Manual

Product: