782095

Scheppach Kity DRA 260 Manual

27
Zoom out
Zoom in
Previous page
1/36
Next page
27
Installation
• Make sure there is sufcient space for handling the
work piece over the whole length without the operator
(or another person) having to stand in line with the
work piece.
• Using bolts, washers and hexagon nuts (not supplied
with the machine), the planer/thicknesser can be
bolted to a work bench.
• The planing machine must be bolted onto a rm, level
surface.
• The machine may not tilt.
Machine setting up and functions
The electric planer/thicknesser is transportable. It is
powered by a single-phase motor and is double insu-
lated. It has been designed for planing wood, and it
features a rational construction, easy operation, and
high efciency.
Maintenance
Always pull the power supply plug before doing any
servicing work. Having nished the work, put the
cutter block guard in operating position again.
Machine care
The planer/thicknesser requires little maintenance. The
ball bearings are permanently lubricated. After approx.
ten operating hours, lubrication of the following parts
is re commended:
• Bearing of the infeed and output roller
• Bearing of pulley and sprocket
• Greasing the chain.
The threaded spindle for height-adjustment of the thick-
nessing table may only be treated with a dry lubricant
agent.
The table surfaces as well as the infeed and output
rollers must always be kept free from resin.
• Regularly clean infeed and output rollers.
• In order to avoid overheating of the motor, regularly
check the air openings for any dust sticking on.
• After a longer period of use, it is recommended to
have the machine checked by an authorized dealer
service.
Tool care:
• Cutter block, clamping devices, knife supports and
knives must be regularly cleaned from resin, as
a clean tool improves the planing quality. To this
purpose, clamping devices, knife supports and knives
can be put in a common resin remover for 24 hours.
• Resin from aluminium tools may only be removed with
cleaning liquids not being aggressive to this type of
Installation
• Vérier qu’il y a sufsamment d’espace pour guider le
bois sur toute sa longueur, sans qu’une personne ou
l’utilisateur puisse se trouver en ligne avec la pièce
de bois en cours d’usinage.
• Le rabot-dégau peut être xé sur un établi à l’aide de
boulons, rondelles et écrous hexagonaux (non fournis).
• Le rabot-dégau doit être vissé solidement sur une
surface stable et lisse.
• La machine ne doit pas basculer et les tables doivent
être alignées
Construction et fonctions de la machine
Le rabot-dégau peut être transporté. Il est entraîné par
un moteur monophasé et possède une double isolation.
Il a été conçu pour travailler le bois. Sa construction
est rationnelle ,très efciente, son utilisation est aisée
Entretien
Lors de toute opération d’entretien et de net-
toyage, arrêter le moteur et débrancher la prise
d’alimentation. Une fois les travaux achevés, tous
les dispositifs de protection doivent être remontés
immédiatement.
Entretien de la machine:
Le rabot-dégau exige peu d’entretien. Les paliers sont
graissés à vie. Après 10 heures de fonctionnement, il
est recommandé de huiler les éléments suivants:
• Paliers des rouleaux d'avance et de sortie
• Paliers de la poulie et de la roue dentée
• Graissage de la chaîne.
La broche letée pour le réglage en hauteur de la table
de rabotage doit uniquement être traitée avec un lubri-
ant sec.
Il faut veiller à ce que les tables et les rouleaux ne
présentent aucune trace de résine.
Les rouleaux encrassés doivent être nettoyés.
Pour éviter l’échauffement du moteur, contrôler réguliè-
rement si les ouvertures d’air sont libres de poussière.
Après une utilisation prolongée, il est recommandé
de faire inspecter la machine par un atelier d’entretien
agrée.
Entretien des outils:
Enlever régulièrement la résine de l’arbre de rabotage,
des dispositifs de serrage, des supports de fers et des
fers. Un outil propre améliore la qualité de coupe. Pour
enlever la résine, les outils peuvent être immergés
pendant 24 heures dans un produit de dérésinage du
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach Kity DRA 260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Kity DRA 260 in the language / languages: English, German, French as an attachment in your email.

The manual is 2.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info